jscharphorn Posted April 15, 2013 Report Share Posted April 15, 2013 any tips or links on how to change the rear axle bearings ? Quote Link to comment Share on other sites More sharing options...
nightmarebanshee Posted April 15, 2013 Report Share Posted April 15, 2013 use a big socket and a small sledge hammer...on mine previous owner didnt install seal on brake caliper side so i had to break out the torch and dremel....but basically get a socket that will fit around the ring of the old bearing and smack it out you will have to do that on each side...it can be a pain Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted April 15, 2013 Report Share Posted April 15, 2013 Slide hammer and a blind bearing puller. Leave the carrier in the bike and go to town on it. Install, socket and bfh. Quote Link to comment Share on other sites More sharing options...
Coupelx Posted April 15, 2013 Report Share Posted April 15, 2013 Bfh and a board to get the axle out and a thick punch or rod for the bearings Quote Link to comment Share on other sites More sharing options...
jscharphorn Posted April 15, 2013 Author Report Share Posted April 15, 2013 Thanks guys, I was thinking that was the way. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.