Pastrykiller Posted April 14, 2013 Report Share Posted April 14, 2013 If your front exhaust hangers are separating. Don't buy new ones unless you have to. Take them an drill them. You will need m4x7 threads and length is either 20 or 25. Install some lock nuts in the back and repaint them. Save some coin and get a little more life out of them. Cost is about 2.50 us Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted April 14, 2013 Report Share Posted April 14, 2013 Good info Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 14, 2013 Report Share Posted April 14, 2013 Been doing this for a while. I use nylon lock nuts in the back and keep them loose to still maintain the rubbers absorbing ability. But a must with stock hangers Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted April 14, 2013 Report Share Posted April 14, 2013 I've done this too except with bigger bolts. Works like a charm. Yours looks better than mine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.