chayote86 Posted April 4, 2013 Report Share Posted April 4, 2013 I bought some domes off member here and I was assembling my engine today tried to put the spark plugs in and they were real tight. So I didn't want to force them in.. Anyone have an issue like this? Wrong domes? Br8es plugs so idk what's going on. Thanks Ro Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 4, 2013 Report Share Posted April 4, 2013 The domes I got from chariot were extremely tight. I ran a few spark plugs through and I never had a problem. Just annoying. Quote Link to comment Share on other sites More sharing options...
chayote86 Posted April 4, 2013 Author Report Share Posted April 4, 2013 So force them in? Quote Link to comment Share on other sites More sharing options...
James_21 Posted April 4, 2013 Report Share Posted April 4, 2013 Just make sure the threads are good and clean too Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 4, 2013 Report Share Posted April 4, 2013 I wouldn't use the word force, but I wasn't able to bottom them out by hand and then crank them with a wrench. Quote Link to comment Share on other sites More sharing options...
chayote86 Posted April 5, 2013 Author Report Share Posted April 5, 2013 I got them in. I'll prob take them out and blow the top end out tomorrow just in case shavings or dirt fell in the chamber Quote Link to comment Share on other sites More sharing options...
toytech Posted April 5, 2013 Report Share Posted April 5, 2013 you could use a thread chaser Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted April 5, 2013 Report Share Posted April 5, 2013 If you're taking them out you might as well go ahead and tap them. M14x1.25 is the size. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.