06BCBANSHEE Posted April 1, 2013 Report Share Posted April 1, 2013 So I got my +2 stem from burgard about a mo th ago. Sold my bent stem for a 6 pack of beer. Anyways im pretty sure I got a stock length or maybe a plus 1" I was going through some pics of +2 stems and mine doesnt look nearly as high. Can anyone verify this for me? If they did I highly doubt they are gonna send me the right one. Their customer service sucks ass Quote Link to comment Share on other sites More sharing options...
SandSlingerOR Posted April 1, 2013 Report Share Posted April 1, 2013 Yeah you got screwed. Actually your lucky you even got the stem in the first place, from what Ive read, some people have never even got their from burgard. Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 1, 2013 Author Report Share Posted April 1, 2013 Ya i had a feeling it was a little short, but like u said they were such a bitch to deal with I didnt even wanna bother. Fuck!! Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 1, 2013 Author Report Share Posted April 1, 2013 Is there any risers that will fit fat bars? Didnt wanna have to run risers but at this point, it is probably my only option Feels great just wish it was a little taller for when i stand up. Quote Link to comment Share on other sites More sharing options...
250rbanshee Posted April 1, 2013 Report Share Posted April 1, 2013 Yea you should be able to find some risers to fit it. Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 1, 2013 Author Report Share Posted April 1, 2013 These are the only ones I have been able to find...if anyone knows of abetter brand or how these would work pls let me know. Or if there is a higher clamp I could use? Quote Link to comment Share on other sites More sharing options...
Coupelx Posted April 2, 2013 Report Share Posted April 2, 2013 I have them on my motorcycle. Work alright. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 2, 2013 Report Share Posted April 2, 2013 I have a +2 that I would swap you. I have 2 sets of fat bar clamps as well. My girlfriend isn't happy with it Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted April 2, 2013 Report Share Posted April 2, 2013 Tusk Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted April 2, 2013 Report Share Posted April 2, 2013 OH! I got a riser i will sell you! Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 2, 2013 Author Report Share Posted April 2, 2013 Sheerider11 i sent you a pm. Those risers in that pic is hilarious. DDQ i do not own a welder, or know where I could even get that done somewhere. Would hate to cut a brand new stem lol. Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 2, 2013 Author Report Share Posted April 2, 2013 I know tusk makes good shit so I may look at those. I have never bought or traded from the forums. But sheerider11 has always given me good advice in the past. Quote Link to comment Share on other sites More sharing options...
Azryll Posted April 2, 2013 Report Share Posted April 2, 2013 I just measure my stock one like you measured yours and I came up 22.5. Then I measure my +1 Roll design stem and it was about 24.5 (it was a little harder since its mounted on the bike, off 1/4" inch at most). So technically I think you did get a +2 but I have seen some on other peoples bike that are huge. If you still want it taller I seen a few companies that make taller clamps right on top of your stem so you don't have to put a riser on yours and make it look like a big chunky mess. Such as http://www.ebay.com/itm/Universial-Tall-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/400448483360?pt=Motorcycles_Parts_Accessories&hash=item5d3c96f020 compaired to the stock size clamp http://www.ebay.com/itm/Black-Universial-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/200907351461?pt=Motorcycles_Parts_Accessories&hash=item2ec702e5a5. I've never used that company just trying to give ya some ideas instead of risers . Kind of depends what bars you get and how tall you want them Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted April 2, 2013 Author Report Share Posted April 2, 2013 I just measure my stock one like you measured yours and I came up 22.5. Then I measure my +1 Roll design stem and it was about 24.5 (it was a little harder since its mounted on the bike, off 1/4" inch at most). So technically I think you did get a +2 but I have seen some on other peoples bike that are huge. If you still want it taller I seen a few companies that make taller clamps right on top of your stem so you don't have to put a riser on yours and make it look like a big chunky mess. Such as http://www.ebay.com/itm/Universial-Tall-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/400448483360?pt=Motorcycles_Parts_Accessories&hash=item5d3c96f020 compaired to the stock size clamp http://www.ebay.com/itm/Black-Universial-Motorcycle-Bar-Handlebar-Mounts-Riser-Clamp-Oversize-1-1-8-/200907351461?pt=Motorcycles_Parts_Accessories&hash=item2ec702e5a5. I've never used that company just trying to give ya some ideas instead of risers . Kind of depends what bars you get and how tall you want them Hey thanks for measuring man, I really appreciate that. Ya I was expecting to get something a little taller like most of the pics I seen. Oh well thats what I get for cheeping out. the link you sent me is definitely what I would prefer over risers. But with those its only gonna give me a 20mm rise over what I have now. I think i need about 1 1/2'' I love my bars, they are super comfy and I like the bend, so I dont want to get rid of them. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted April 2, 2013 Report Share Posted April 2, 2013 PM replied Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.