360CICJ Posted March 24, 2013 Report Posted March 24, 2013 Wasn't going to post this up but I've seen a lot of people lately talking about 2 into 1's and different styles. I made mine out of some billet intakes and some 1.75 x .125 wall tubing. I made mine to have a steeper angle and to have a good flow. Let me know what y'all think, I went back into the intakes and ground them out to blend the tubing into the intakes with a carbide burr bit and a 90 degree. Made the aluminum plate with the bolt pattern in the right locations to hold the intakes the right distance apart. Friend at work gave me a 38 PWK A/S to pair up with it. Quote
trickedcarbine Posted March 24, 2013 Report Posted March 24, 2013 Dude! That is actually a pretty nice piece. Kind of an improved Graydon. I liked it more when it was still all raw though. You did a pretty good job crafting that thing for sure. Guys will still bitch, but I garuntee they are the guys that have only had junk 2-1 set ups. Just out of curiosity, ever consider selling one of those? Quote
Scrubtherubber Posted March 25, 2013 Report Posted March 25, 2013 you got skills mang looks good Quote
360CICJ Posted March 25, 2013 Author Report Posted March 25, 2013 Thanks guys, my friend actually welded it up, I did the machine work and fabrication. Thanks tricked, I actually have thought seriously about making these and some other parts but im currently waiting to get a house and shop built. I have a bridgeport ready to go into the shop, just need to build it, maybe within a year or so I can start making parts to sell. Quote
Vicstuff Posted March 26, 2013 Report Posted March 26, 2013 If you consider selling I'd be interested definitely looks like an improved graydon Sent from my HTC_Amaze_4G using Tapatalk 2 Quote
gomerkfx700 Posted April 2, 2013 Report Posted April 2, 2013 Be cool if some one made a intake like that that would go into sat a set of 26mm intake boots with a support on it somewhere it would save a lot of fab time and money. Quote
gomerkfx700 Posted April 2, 2013 Report Posted April 2, 2013 Well I said 26 because most everyone has them who would want to run a 2-1. You don't see many people with 33-35 pwk's wanting to go to a 2-1. And If your running a single 40mm carb its still going threw 52mm worth of intake. So without Sharpe angles it won't be restrictive. Quote
sleeper06 Posted April 2, 2013 Report Posted April 2, 2013 Best I have ever seen was a 40 mm jet ski carb bike ran strong with just a clean up port.most run 33-35 singles some 38-39 I wouldn't run 26 Quote
1bad4millbanshee Posted July 5, 2013 Report Posted July 5, 2013 Dude! That is actually a pretty nice piece. Kind of an improved Graydon. I liked it more when it was still all raw though. You did a pretty good job crafting that thing for sure. Guys will still bitch, but I garuntee they are the guys that have only had junk 2-1 set ups. Just out of curiosity, ever consider selling one of those? ill buy one Quote
1bad4millbanshee Posted July 5, 2013 Report Posted July 5, 2013 Thanks guys, my friend actually welded it up, I did the machine work and fabrication. Thanks tricked, I actually have thought seriously about making these and some other parts but im currently waiting to get a house and shop built. I have a bridgeport ready to go into the shop, just need to build it, maybe within a year or so I can start making parts to sell. ill buy Quote
gomerkfx700 Posted July 8, 2013 Report Posted July 8, 2013 You guys totally missed what I was saying if the intake was made to slide into the stock carb boots and not have the custom made alum. that bolts on the head just the Y and it slide into the stock boots the pipe could be 28mm or maybe bigger inside Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.