trickedcarbine Posted March 24, 2013 Report Share Posted March 24, 2013 Don't bother with the 2-1 on a dune port. If you are spending so much Money with fast, might as well let him do the porting to. Or get your stuff from Kevin if he's doing your cylinders. Usually makes less headache to get it all from one fella. Might even get you a better deal. Also, your list looks good, but make sure to get all those little OEM Clips, fasteners, locking washers, clutch pieces, and misc parts known to fail. You Won't need straight cuts on that build either. Some tranny work would be nice though. Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 25, 2013 Author Report Share Posted March 25, 2013 @toytech what brand would you recommend for the crank? Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 25, 2013 Author Report Share Posted March 25, 2013 @trickedcarbine I didn't where to get the cylinders and I heard hjr does good port jobs. What would recommend for the tranny I wasn't planning on touching it but I seen the gears on his page and thought might as well do it since its all gonna be apart Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 25, 2013 Report Share Posted March 25, 2013 Just a stock cut. No need for an over ride unless you are a drag racer or hill shooter. Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 25, 2013 Author Report Share Posted March 25, 2013 So I can just leave the tranny the way it is unless there is something wrong with it Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 25, 2013 Report Share Posted March 25, 2013 So I can just leave the tranny the way it is unless there is something wrong with it No. Once I put a stroker and port work, my bike would not shift. The bike would constantly miss gears. I went through it all. Damn near new everthing. Left the trans stock. Paying for it now in a big way. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 25, 2013 Report Share Posted March 25, 2013 Yeah, get it cut. Stock style cut though. Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 25, 2013 Author Report Share Posted March 25, 2013 @sheerider11 thanks for letting me know @trickedcarbine do you know where I can send them to get them done? Quote Link to comment Share on other sites More sharing options...
toytech Posted March 26, 2013 Report Share Posted March 26, 2013 @toytech what brand would you recommend for the crank? I would get a hot rods from Jeff at fast, for a few extra bucks he checks it and does a nicer weld. Quote Link to comment Share on other sites More sharing options...
toytech Posted March 26, 2013 Report Share Posted March 26, 2013 camatv does a good stock trans, that will shift. I went with a duneable overide though, from hjr works great. Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 26, 2013 Author Report Share Posted March 26, 2013 @Toytech Yeah that's the crank I was planning to buy. Would you recommend the duneable overide because I only go to the dunes anyways Quote Link to comment Share on other sites More sharing options...
toytech Posted March 26, 2013 Report Share Posted March 26, 2013 @Toytech Yeah that's the crank I was planning to buy. Would you recommend the duneable overide because I only go to the dunes anyways I like mine. but you have to becarful not to backload it to much. Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 26, 2013 Author Report Share Posted March 26, 2013 What you mean by backload? Quote Link to comment Share on other sites More sharing options...
toytech Posted March 26, 2013 Report Share Posted March 26, 2013 What you mean by backload? backload is when you let off the throttle and use the engine to slow the quad down, or down shift to slow it down, some is ok but not to much. 1 Quote Link to comment Share on other sites More sharing options...
Vinny_Vincenzo408 Posted March 26, 2013 Author Report Share Posted March 26, 2013 I don't downshift to slow the bike down I either coast it or use the brakes is that ok with that tranny setup? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.