jasongray5 Posted March 21, 2013 Report Share Posted March 21, 2013 Hi guys, I recently bought a banshee that needed a rebuild, so rebuit it and now im looking for some advice on Jetting! I have a 2004 banshee, re-bored to 65mm, K&N style filter with no airbox lid, and FMF pipes. It had 260's in there but from what I have read, these could be abit lean and the reason it came to me needing a rebuild? Just on a test run, with new plugs, it was really boggy down low, then once that cleared, it went like the clappers. I know alot of it is trial and error, but do you guys have any idea where to start with this set up. Cheers, Jason Oh and im from Western Australia, so any other WA members on here, would love to hear from you guys! Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted March 21, 2013 Report Share Posted March 21, 2013 Hiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted March 21, 2013 Report Share Posted March 21, 2013 welcome and enjoy the forum. whats your elevation over there? if your under 2000ft you will prob be around 270-280 mains Quote Link to comment Share on other sites More sharing options...
lil Doobie420 Posted March 21, 2013 Report Share Posted March 21, 2013 try 290s Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted March 21, 2013 Report Share Posted March 21, 2013 27.5 pilot too !! Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 21, 2013 Report Share Posted March 21, 2013 Just on a test run, with new plugs, it was really boggy down low, then once that cleared, it went like the clappers! So, it really burned when you went? X2 on the 27.5 and 290's also give the needle one clip richer Quote Link to comment Share on other sites More sharing options...
wfobasheeboy Posted March 21, 2013 Report Share Posted March 21, 2013 If you are at sea level I would start at 27.5 and 290's and the needle clip in the middle. Then give it a test run and check the plug. Quote Link to comment Share on other sites More sharing options...
jasongray5 Posted March 21, 2013 Author Report Share Posted March 21, 2013 Cheers for the replies fella's. Will the bike shop 50k's from us has a range of those jets in stock so will head off there later today and give this jetting lark a red hot crack! Jason Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.