Jump to content

10mm Twister drag bike Part Out BRAND NEW MOTOR


Recommended Posts

Bought this a few days ago to part out- Everything is stripped down and ready to ship Motor is BRAND NEW, I spoke to Louie himself from Twister and he confirmed everything- Louie shipped the whole motor back to this guy, he sat it in the frame and that was it- there is still assembly lube on everything as you will see in the pictures Okay here we Go- Again the motor was assembled and NEVER RAN Prices are shipped

-10 mil small block twister w/ Clean up 71mm bore-Complete w/ 2 sets of domes and new orings 1250.00 SOLD

- Billet twister crank w/TZ bearing and extra welds 900.00. SOLD

 

-Trenched and ported Cases (very clean) 275.00 SOLD

 

- Tranny ? (Override in separate thread)SOLD

 

-Cascade polished Brand new PWK 39's w/decent 6'' filters, cable, twist and thumb throttle and new hoses 375.00. SOLD

 

-Fireball billet intakes w/ brand new V-force 2's 225.00

 

-BB Stator side Shearers w/brand new silencers (have a dent on the bottom which you cant see when mounted) 425.00. SOLD

 

-Hinson billet Basket, pressure plate, new clutch, pancake bearings and springs 400.00 SOLD

 

- Brand new 38mm Mikuni alky Carbs polished by Cascade- decent filters,throttle cable, hoses 500.00 SOLD

 

-2 front Bumpers 45.00 each

 

-LSR chrome +2+1 A-arms, tie rods, SS brake lines and calipers 400.00 SOLD

 

- Wicked front Drag Shocks 12-13'' 225.00 SOLD

 

- Durablue sway bar setup 175.00

 

-2 barnett clutches w/ 1 set of springs ( one set of plates have alittle surface rust) 55.00 for both SOLD

 

-Clutch cable and shorty clutch perch 30.00

 

-Freshly chromed foot pegs w/ chrome hardware 50.00 SOLD

 

-Grab Bar 45.00

 

- Chrome Drag bars 55.00 SOLD

 

-LSR standard length anti vibe steering stem 180.00

 

-American racer front Tires w/ rims 18-6-10 (tires brand new) 175.00 SOLD

 

- Slightly Lightened front hubs w/spindles 85.00

 

-Complete rear brake setup w/ block off plate and SS +8 brake line 85.00 SOLD

 

-Brake and clutch perch 35.00

 

-Clutch package- Inner and outer hubs w/ New clutch and pancake bearing 100.00

 

-LSR +4 Axle complete w/ wheels hubs,brake hub, billet honda style sprocket hub, NEW lock nut 275.00 SOLD

 

-complete blue race cut plastics w/Seat 125.00 pick up only

 

- Titled frame 300.00

 

These are the items that were sold prior to me starting the thread that's why they arent listed!

PVL ignition SOLD

Stator and clutch cover SOLD

Radiator SOLD

+8 swinger SOLD

lower link, dog bone and strut SOLD

Air shifter SOLD

Tires and rims ( On the bike) SOLD

Billet kicker SOLD

Gift money or add the Fee's jojo0597@yahoo.com

Pictures will be up shortly

Link to comment
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

howd that work with the helical gear on the clutch and straight cut on the crank?

 

bump good deals

 

 

OOOO good eye fella, It came with straight cuts but those are spoken for

That hinson basket is from another bike i parted out last week or so

 

Joe

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...