Scrubtherubber Posted March 14, 2013 Report Share Posted March 14, 2013 bought a shee over the winter and going of the whole thing before riding season starts, just got it running and jetted properly and now I notice it pulls hard to left I figured a simple alignment would take care of it but it seems the a arms are bent.... Anyone have any suggestions for a set of new plus 2 or 3's with new lines and tie rods the hack who had it before after looking deeper seems to have just bent out the factory lines for the aftermarket arms that are on it Quote Link to comment Share on other sites More sharing options...
Glenyboy Posted March 15, 2013 Report Share Posted March 15, 2013 What's your budget, and what type of riding do you do? Quote Link to comment Share on other sites More sharing options...
Scrubtherubber Posted March 15, 2013 Author Report Share Posted March 15, 2013 About 500 mostly trail Quote Link to comment Share on other sites More sharing options...
Burke Posted March 16, 2013 Report Share Posted March 16, 2013 what brand are the arms that are on it?... I know several companies offer lifetime warranties... you might be able to get replacements Quote Link to comment Share on other sites More sharing options...
EZ2FLEE Posted March 16, 2013 Report Share Posted March 16, 2013 i went with Stellar, for my arms and swinger and im very pleased.....awesome craftsmanship Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 16, 2013 Report Share Posted March 16, 2013 I vote no on the ASR stuff! You would be more then happy with a nice set of armadillo or LSR sport arms with some decent used front shocks. Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted March 17, 2013 Report Share Posted March 17, 2013 I vote no on the ASR stuff! You would be more then happy with a nice set of armadillo or LSR sport arms with some decent used front shocks. Both of those are nice ! ( in the sub -500.00 range) Quote Link to comment Share on other sites More sharing options...
Scrubtherubber Posted March 19, 2013 Author Report Share Posted March 19, 2013 well i picked up a set of 13 inch works shocks, and scored a nice lsr +4 axle. so lsr or armadillo? is there a site sponser i should get them from? also seems so cal suspension seems to be the go to for revalving? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 19, 2013 Report Share Posted March 19, 2013 Bummer, your 13" shocks will be no bueno on +2 arms. Try eBay listings for arms. Usuall a hand full of guys you can compare prices and typically they have free shipping. This link will show how A bike sits on 13" shocks. Normally the drag or flat track guys run them. http://bansheehq.com/forums/index.php?showtopic=109295 Quote Link to comment Share on other sites More sharing options...
Scrubtherubber Posted March 20, 2013 Author Report Share Posted March 20, 2013 those look like stock arms down the plus 2 arms make it sit higher then stock? Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 24, 2013 Report Share Posted March 24, 2013 No. Plus they wil put more leverage on the shock. Quote Link to comment Share on other sites More sharing options...
jayhawkatv Posted March 24, 2013 Report Share Posted March 24, 2013 I have +2 +1 roll design a arms (blue powder on bottom, chrome on top,) and 14.5 works. for sale but not for -500. frame to match a arms also Quote Link to comment Share on other sites More sharing options...
Scrubtherubber Posted March 24, 2013 Author Report Share Posted March 24, 2013 I have +2 +1 roll design a arms (blue powder on bottom, chrome on top,) and 14.5 works. for sale but not for -500. frame to match a arms also I already got arms how much go the shocks? Quote Link to comment Share on other sites More sharing options...
jayhawkatv Posted March 25, 2013 Report Share Posted March 25, 2013 Make me a reasonable offer. Quote Link to comment Share on other sites More sharing options...
Triplejbanshee12 Posted March 31, 2013 Report Share Posted March 31, 2013 How much u selling roll design arms? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.