Scooter350 Posted March 13, 2013 Report Share Posted March 13, 2013 My jettings a lil much running a pwk 39mm 210main 45 pilot 2into1 trinity with pod dune port 21cc coolhead domes fmf sst cf reeds 700' elevation what should I jet it down to? Quote Link to comment Share on other sites More sharing options...
Scooter350 Posted March 13, 2013 Author Report Share Posted March 13, 2013 And .30 over if that helps Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted March 14, 2013 Report Share Posted March 14, 2013 200? I'm not sure on single carbs, but is a 45 pilot normal? That seems low. I have a 50 on dual 35's. I would think it has to be more the what I have since it has 2 cylinders to feed Quote Link to comment Share on other sites More sharing options...
Scooter350 Posted March 14, 2013 Author Report Share Posted March 14, 2013 2003 its also in the middle notch on the needle, thought it was a little off but just wanted a couple of opinions. Low-end is way rich, and fouled my stator side plug so need to order a few different sets to get me in the ballpark, thanks for the info if you have anymore suggestions definitely let me know Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted March 14, 2013 Report Share Posted March 14, 2013 I ran a 190 main and 48 pilot on a single 33 Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted March 14, 2013 Report Share Posted March 14, 2013 Maybe try a 200 main and 50 opt 52 pilot . I am at 88ft elevation Quote Link to comment Share on other sites More sharing options...
Scooter350 Posted March 14, 2013 Author Report Share Posted March 14, 2013 Just ordered a assortment of different sizes in that range ill try em all till I like it thanks for the info Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 17, 2013 Report Share Posted March 17, 2013 Zilla is in the ball park. Try something like a 50-55 pilot, EEK or EEJ needle, and a 170-175 main Quote Link to comment Share on other sites More sharing options...
Scooter350 Posted March 21, 2013 Author Report Share Posted March 21, 2013 Thinking about moving the needle position, I'm a lot closer but still a little hesitant when I floor it wot bout 3rd gear then I feather the throttle back and catch up on powerband. I'm running the 170/55 middle position needle clip right now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.