chayote86 Posted March 12, 2013 Report Share Posted March 12, 2013 I'm rebuilding my shee and added a few parts to the list so I need help on where to start my jetting. I have stock ported jugs K&n pods (knock offs) Vforce3's Cool head 35mm pwk's Advanced timing prob set it up at +4 I'm in 1000ft elevation any tips would help thanks Ro 1 Quote Link to comment Share on other sites More sharing options...
chayote86 Posted March 12, 2013 Author Report Share Posted March 12, 2013 And CPI in frames Quote Link to comment Share on other sites More sharing options...
Abe Posted March 12, 2013 Report Share Posted March 12, 2013 155 main and 48 pilot should be pretty close and a little to the rich side to get you started and most always start out with CEL needle in the middle clip. Type of porting will make a difference as well , if full drag may wanna start with a 160 and come down just to be safe Quote Link to comment Share on other sites More sharing options...
chayote86 Posted March 14, 2013 Author Report Share Posted March 14, 2013 Thanks abe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.