bansheeboy01 Posted March 12, 2013 Report Share Posted March 12, 2013 Hey everyone. i have a 2001 banshee with stock cylinders, i need to strip the motor down to repair a crack in the motor case i have hundreds of things i wanna do but its all expensive i have 1000 bucks mabey a little more for motor mods what should i do for max power and still have a reliable motor that i dont have to worry about spinning a crank. i already have fmf pipes, carbs have dyno jets, and a fmf boost bottle. please let me know your guys thoghts. Quote Link to comment Share on other sites More sharing options...
Finch Posted March 12, 2013 Report Share Posted March 12, 2013 get the crank welded and good port job some better pipes and ditch the boost bottle Quote Link to comment Share on other sites More sharing options...
04_blu_shee Posted March 12, 2013 Report Share Posted March 12, 2013 Just what Finch said exactly....on my dune port motor I was making 65hp with stock 26mm carbs so thats one investment you really dont need to make....you want power port your motor a good builder will tell you what other parts needed with a port job to get the power you are looking for Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 ok good idea boys what pipes would u suggest ? and what about also adding i timming plate.. coolhead with 21cc domes.. and the dynoteck ignition kit with a new stator? Quote Link to comment Share on other sites More sharing options...
04_blu_shee Posted March 12, 2013 Report Share Posted March 12, 2013 These questions are really determined on one question....What type of riding are you planning on doing with your new build. Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 all round.. drag.. street..track.. trails might start looking into draging.. i wont have anything to crazy with stock cylinders anyway but i would like something with lots of power and still be reliable Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted March 12, 2013 Report Share Posted March 12, 2013 Port work dollar for dollar is the best mod you can do if your into the engine that far, a coolhead, and some VF3's or 4's. That would make a stout machine on stock cyls. Don't over bore unless you have to, you can't put bores back, and you only get a few.. Quote Link to comment Share on other sites More sharing options...
Dalton Posted March 12, 2013 Report Share Posted March 12, 2013 What Finch said...get crank welded with RZ bearing ..have cylinders professionally ported to your riding style... Quote Link to comment Share on other sites More sharing options...
oldskool Posted March 12, 2013 Report Share Posted March 12, 2013 Yes, I would do timing plate at +2/+4 Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 0 get the crank welded and good port job some better pipes and ditch the boost bottle what pipes would u suggest Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 12, 2013 Report Share Posted March 12, 2013 0 get the crank welded and good port job some better pipes and ditch the boost bottle what pipes would u suggest What kind of riding do you do? Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 What kind of riding do you do? Sent from my SGH-T679 using Tapatalk 2 hill climb .. tracks.. trails.. a little of everything lol Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 12, 2013 Report Share Posted March 12, 2013 Oh ok, I didn't see you had the pipes already. Zilla is right, Fmf is actually a decent pipe. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 Oh ok, I didn't see you had the pipes already. Zilla is right, Fmf is actually a decent pipe. Sent from my SGH-T679 using Tapatalk 2 u also mentioned to get rid of the boost bottle is stock better? Quote Link to comment Share on other sites More sharing options...
bansheeboy01 Posted March 12, 2013 Author Report Share Posted March 12, 2013 and where is the best spot to get part from Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.