gomerkfx700 Posted March 5, 2013 Report Share Posted March 5, 2013 Ok my buddys banshee is bored to 64.75 has fmfs +4 timing pods on stock carbs and vf4s portwork is not pro work but looks decent also has 18cc domes with 108 fuel. The bike runs nice on top has a really hard hit but from dead stop has no rollon just does not want to come on the pipe and ideling dry reving it just seems like it doesnt want to rev he says when you are goin and it comes on its extream hard hit it actually ran out from under him today when it came on in second very funny phone call. I have not rode it or looked at it just asking for him. He doesnt have an acct. Hear and isnt very familiar with forums. Piolet jet i dont know main is 310 mixture screws 2 turns out. Clip in middle. I think its fat on piolet or air screw but ive not looked at it. But he says plugs look good after a pass just cant get the bottom end lined out What do you guys think Quote Link to comment Share on other sites More sharing options...
JUSTWANNARACE Posted March 5, 2013 Report Share Posted March 5, 2013 Sounds like it could be to lean on the pilot jet Quote Link to comment Share on other sites More sharing options...
FullThrottle_06' Posted March 5, 2013 Report Share Posted March 5, 2013 Definetly lean on the pilot. Throw a 27.5 in there and come 1 turn out with it and go from there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.