06BCBANSHEE Posted March 3, 2013 Report Share Posted March 3, 2013 Well I recently installed a bunch of parts in the last two weeks. pretty much went over everything, cleaned carbs installed new rad,stabilizer,stem, fat bars, vforce4 reeds, manually sync carbs had 280 mains, 30 pilot before the reeds. was kinda boggy so i dropped it to a 27.5 ran great. Dunno if I am being a hyprochondriatic or what, but I re installed everything , put the tank on. Dunno if it did this before or not, but my fuel line from the petcock to the carbs keeps getting air bubbles. it feels like its struggling for fuel at 0- 1/8 throttle, Doesnt seem like the air bubbles are normal, took it for a ride and it kinda struggles at very little throttle, after that it flat out rips. kinda shitty pic sorry for such the dumb questions Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted March 3, 2013 Report Share Posted March 3, 2013 yeh shit pic. just turn the fuel on, and push the line down, so the bubble exits through the tank. Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted March 3, 2013 Author Report Share Posted March 3, 2013 fuck thanks man, Its been a long day, I dont think my head is all there, that worked. thank you!!!!!!!!!! Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted March 3, 2013 Author Report Share Posted March 3, 2013 well i thought that worked, still has air bubbles. i pulled the hose connecting to the carb, and fuel pours out. Am i just being a hyprocondriac? never noticed it before. if it was staving for gas it wouldnt run/idle right? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted March 3, 2013 Report Share Posted March 3, 2013 You suck at "Things" Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 3, 2013 Report Share Posted March 3, 2013 Try and make sure the fuel hoses have a smooth down ward flow with no harsh bends. Make sure the vent and over flow lines arent goobered up with that greasy shit build up. Also, don't know your mods, but a gutted gas cap might help. With the VForce 4's you should be up an additional size. Try the 30 again. Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted March 3, 2013 Author Report Share Posted March 3, 2013 haha fuck off savage, I got ease up on the 6 paper joints lol Try and make sure the fuel hoses have a smooth down ward flow with no harsh bends. Make sure the vent and over flow lines arent goobered up with that greasy shit build up. Also, don't know your mods, but a gutted gas cap might help.With the VForce 4's you should be up an additional size. Try the 30 again. thanks man, ya I cut the hose a bit to give it more of a downward option, seemed to do the trick. i think ill be changing my jetting as well. did a plug chop today and im running lean. Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted March 4, 2013 Report Share Posted March 4, 2013 try pulling it off and running it UNDER your crossover tube.......that way it stays running in a downward angle the entire time.... 1 Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted March 4, 2013 Author Report Share Posted March 4, 2013 Ya ill def do that jereme6655. Thanks guys!! Quote Link to comment Share on other sites More sharing options...
06BCBANSHEE Posted March 4, 2013 Author Report Share Posted March 4, 2013 Ya ill def do that jereme6655. Thanks guys!! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.