472 supercub Posted February 28, 2013 Report Share Posted February 28, 2013 i have a 4 mill super wampus changing to alky i have 24cc domes using now on race fuel what would be a good size to use with alky i dont dune ride only asphalt any ideas Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 1, 2013 Report Share Posted March 1, 2013 What is your compression on those particular domes? And who are they done by. I feel like alky does really stellar in the 160-175 range Quote Link to comment Share on other sites More sharing options...
Finch Posted March 1, 2013 Report Share Posted March 1, 2013 Get some cut I just had wildcard do some for my 4 mill Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 2, 2013 Report Share Posted March 2, 2013 What is your compression on those particular domes? And who are they done by. I feel like alky does really stellar in the 160-175 range I was told the same thing. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Finch Posted March 2, 2013 Report Share Posted March 2, 2013 There more to it then static comp... Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted March 3, 2013 Report Share Posted March 3, 2013 There more to it then static comp...Absolutely, espscially in the drag stuff with larger bore and stroke and an altered exhaust port. Just kind of a general area to find out where you are at. But if you start asking guys their UCCR, the majority won't know how to figure it out. Even with correct math things can still be a bit off. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.