Pastrykiller Posted March 1, 2013 Report Share Posted March 1, 2013 You beat me to it cam. Quote Link to comment Share on other sites More sharing options...
camatv Posted March 1, 2013 Report Share Posted March 1, 2013 Is the shift sat welded to the drum or can u remove it? what chu sayin here then Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted March 1, 2013 Report Share Posted March 1, 2013 I had to go look at mine. My bad. Should I send u a card to express my apology? Quote Link to comment Share on other sites More sharing options...
Nieskes Posted March 1, 2013 Report Share Posted March 1, 2013 I had to go look at mine. My bad. Should I send u a card to express my apology? I would, seems like it really got to him. Quote Link to comment Share on other sites More sharing options...
bansheefromhell Posted March 1, 2013 Author Report Share Posted March 1, 2013 really because i asked who the hell welds shift stars to drums? that's an honest question. if someone thinks that overrides have welded on shift stars whoever did their override was a moron. Or they have been misslead as to what an override should look like. believe me i see arrogant assholes all damn day. i sell autoparts part time in a bad neighborhood. there are at least 5-10 morons a day that think they know exactilly what they are doing.. and watch way to many YOUtube videos and do to many Google searches.. if yo have to ask if you have an override.. just take the motor out and find out. if you were screwing around and it jammed in between 2 gears its most likey a std trans. if you had backed it off that much during riding it around you possibly would have noticed it poping out of gear or hopping in one gear from the damge done to it.. and really i dont know to many people on this site at least that have purchased bikes and NOT know anything about them..... if you take the bottom end apart and take pics of the gears i can tell you if its an override.. sorry bout your luck partner I'm sorry that I smarted off crybaby Quote Link to comment Share on other sites More sharing options...
possum Posted March 2, 2013 Report Share Posted March 2, 2013 this is great. hahaha Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted March 3, 2013 Report Share Posted March 3, 2013 Interwebzdramahq.com Quote Link to comment Share on other sites More sharing options...
Nightmare Posted March 3, 2013 Report Share Posted March 3, 2013 Interwebzdramahq.com I still think thumbinthebum.com would be a hit. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Jereme6655 Posted March 10, 2013 Report Share Posted March 10, 2013 well....we know one thing.....if bansheefromhell needs a tranny cut he's gonna need to find someone other than cam to cut it....... even if I were to think that some of the larger name guys on here had no idea what they were talking about....I would still bite my tongue....especially if they are a person who provides a fantastic service that every one of us will need when we start making hp. Quote Link to comment Share on other sites More sharing options...
bansheefromhell Posted March 11, 2013 Author Report Share Posted March 11, 2013 well....we know one thing.....if bansheefromhell needs a tranny cut he's gonna need to find someone other than cam to cut it....... even if I were to think that some of the larger name guys on here had no idea what they were talking about....I would still bite my tongue....especially if they are a person who provides a fantastic service that every one of us will need when we start making hp. damn it! if I only knew he was the only one that could do it... WHY!!! Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted March 11, 2013 Report Share Posted March 11, 2013 damn it! if I only knew he was the only one that could do it... WHY!!! You run your cock holster yet ask more stupid shit about your intakes... FFS Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted March 11, 2013 Report Share Posted March 11, 2013 Hold it WOT and try shifting up without the clutch. If it isnt like butter, the answer is no. Or pull the motor out and split the cases with the engine upside down(that way the juggs dont have to come off). But then you need to know what to loko for like modded shift drum etc depending on type of over ride). I totally forgot how my n-down 1-5 no 6th differs from my stock trans. I just remember the shift drum was modded big time. Quote Link to comment Share on other sites More sharing options...
bansheefromhell Posted March 11, 2013 Author Report Share Posted March 11, 2013 damn it! if I only knew he was the only one that could do it... WHY!!! You run your cock holster yet ask more stupid shit about your intakes... FFS what would you like me to ask? Quote Link to comment Share on other sites More sharing options...
camatv Posted March 11, 2013 Report Share Posted March 11, 2013 well....we know one thing.....if bansheefromhell needs a tranny cut he's gonna need to find someone other than cam to cut it....... even if I were to think that some of the larger name guys on here had no idea what they were talking about....I would still bite my tongue....especially if they are a person who provides a fantastic service that every one of us will need when we start making hp. what do you mean?? if bansheefromhell PM'd me and said hey dude help me with this trans i'm sending it to you for repair i'd do it no problem... actually i have been working on an override off an on for about 2 years. i'm getting closer and closer to having a CNC setup with 4th axis to do the drums along with the angle cuts on the gears... i just dont have unlimited funds and seeing how this is really a "hobby" to me still welp.... there is a difference from welding a star to a drum and a welded neutral tip on a star.. i have been modifying existing overrides for a very long time. most look like total shit to me.. Quote Link to comment Share on other sites More sharing options...
bansheefromhell Posted March 11, 2013 Author Report Share Posted March 11, 2013 well....we know one thing.....if bansheefromhell needs a tranny cut he's gonna need to find someone other than cam to cut it....... even if I were to think that some of the larger name guys on here had no idea what they were talking about....I would still bite my tongue....especially if they are a person who provides a fantastic service that every one of us will need when we start making hp. what do you mean?? if bansheefromhell PM'd me and said hey dude help me with this trans i'm sending it to you for repair i'd do it no problem... actually i have been working on an override off an on for about 2 years. i'm getting closer and closer to having a CNC setup with 4th axis to do the drums along with the angle cuts on the gears... i just dont have unlimited funds and seeing how this is really a "hobby" to me still welp.... there is a difference from welding a star to a drum and a welded neutral tip on a star.. i have been modifying existing overrides for a very long time. most look like total shit to me.. dude I have nothing against you, it's just so easy to talk shit on here that I can't help myself. they are all just trying to be dick suckers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.