Jump to content

1000cc drag banshee


00763aaron

Recommended Posts

Even if you are serious, you don't want to go from a 421 cc to a (legit)1000 cc motor. If you just want to beat your buddy (not sure what a 537 cc or whatever is) you could get by with a 10 mil Cub or 4 - 10  mil DM.

ya very true what mods would u recomend for me to get the most out of my 421 then

Link to comment
Share on other sites

windeing kit is for my son this is for my bike retard

There's a whole lotta love there!!

 

Why don't you show your old lady the suspension thread where your advised against that pos death trap.

 

Your obviously full retard, and nobody ever wins anything once you go full retard! Simple jack.

  • Like 1
Link to comment
Share on other sites

Good chassis, alcohol, good tune (very forgiving for that motor), correct tires, and it wil run 3.8s or better at lots of tracks. PM me if you want. Got a 3rd string 421 that runs 3.7s cause the other 2 were apart. Not close to Menz's but then again no one is.

Link to comment
Share on other sites

 

Ported and polished boost bottle, and 1 rear tire at 10 psi and the other at 2 psi... That is the super secret setup shhhhh

NO No NO! Ya got it all wrong it's the front tires you set up like that and you put on the arched swinger sideways to make it track behind the front

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...