CAJUN BANSHEE Posted February 17, 2013 Report Share Posted February 17, 2013 I sure hope someone knows where I can get another hose barb and tap this size. I barely pulled on the hose and snap, everything went to shit from there. I'm almost tempted to find another set of carbs. Quote Link to comment Share on other sites More sharing options...
m671054 Posted February 17, 2013 Report Share Posted February 17, 2013 Google clippard. They sell fittings like you want. That style pj you have is a pia. Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted February 17, 2013 Report Share Posted February 17, 2013 Or google Dennis Packard or better yet. 1 (801) 451-6142 Quote Link to comment Share on other sites More sharing options...
m671054 Posted February 18, 2013 Report Share Posted February 18, 2013 Maybe for new carbs. He doesnt use this style pj. Why waste his time? Quote Link to comment Share on other sites More sharing options...
CAJUN BANSHEE Posted February 18, 2013 Author Report Share Posted February 18, 2013 Your probly right m6, Ive talked to him before about the nasty condition of my carbs and the pj's. He didnt sound too interested in what I was asking. lol I checked Lectrons website but found nothing, even googled pia power jet and nothing. Searched on clippards site but I'll have to do more research on this nipple to narrow it down to the exact size or replacement. I tried to remove the threads out of the hole but it's probly pressed in. Hopefully someone will chime in with a fix. If not I'll call lectron on Tue. Quote Link to comment Share on other sites More sharing options...
m671054 Posted February 18, 2013 Report Share Posted February 18, 2013 The broken pj is not a lecton piece. Drill out the broken piece. Figure out closest size fitting you can use and tap threads for that size. Install fitting. Check threaded section not sticking to far into pj. Clean up drilling and tapping savings. Good as new Quote Link to comment Share on other sites More sharing options...
CAJUN BANSHEE Posted February 18, 2013 Author Report Share Posted February 18, 2013 The broken pj is not a lecton piece. Drill out the broken piece. Figurei out closest size fitting you can use and tap threads for that size. Install fitting. Check threaded section not sticking to far into pj. Clean up drilling and tapping savings. Good as new That's what I'm going to do, thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.