BeeCanBanshee Posted February 16, 2013 Report Share Posted February 16, 2013 So I picked up these cyl's a while back cause mine were shit. The guy didn't know who ported them so I'm turningto you guys just wanna know what type of port this is if any, is a decent job and if they look Luke crap can it be reworked or is it to far gone. http://s1311.beta.photobucket.com/user/lowery_3/library/ Quote Link to comment Share on other sites More sharing options...
fappy'97 Posted February 16, 2013 Report Share Posted February 16, 2013 I see no pictures of cylinders in your Photobucket... just clutch stuff Quote Link to comment Share on other sites More sharing options...
Nightmare Posted February 16, 2013 Report Share Posted February 16, 2013 Link no worky Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted February 16, 2013 Author Report Share Posted February 16, 2013 Damn it.I hate my phone. Stand by Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted February 16, 2013 Author Report Share Posted February 16, 2013 http://s1311.beta.photobucket.com/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0#/user/lowery_3/media/flywheel/cylinders/IMAG0154_zpse25fae4a.jpg.html?sort=3&o=0&_suid=136098773150209927427507936954 Quote Link to comment Share on other sites More sharing options...
Nightmare Posted February 16, 2013 Report Share Posted February 16, 2013 Whatever it is, its probably better than i can do Quote Link to comment Share on other sites More sharing options...
monster Posted February 16, 2013 Report Share Posted February 16, 2013 http://m1311.photobucket.com/albums/lowery_3?newest=1 Or just click on newest album at bottom of the page on last link. Looks like an ok trail / dune port. Need photos of transfer ports you also can measure from top of the cylinder to port tops this will also help. Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted February 16, 2013 Author Report Share Posted February 16, 2013 Sorry for being a dumbass but.where are the transfer ports. Sides of cyl skirt on bottom? Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted February 16, 2013 Author Report Share Posted February 16, 2013 And how.do you get accurate measurements? My Mic won't fit.in the cyl. Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted February 16, 2013 Report Share Posted February 16, 2013 A degree wheel is the proper way to measure. Quote Link to comment Share on other sites More sharing options...
monster Posted February 16, 2013 Report Share Posted February 16, 2013 Sorry for being a dumbass but.where are the transfer ports. Sides of cyl skirt on bottom? Yes! Here is a link with lots of port info hope it helps goggle it if you don't understand terms used. Quote Link to comment Share on other sites More sharing options...
Larry's Shee Posted February 16, 2013 Report Share Posted February 16, 2013 no see linc monser Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted February 16, 2013 Report Share Posted February 16, 2013 home job. cant really see the exhaust. should take it some where to check it out. Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted February 16, 2013 Report Share Posted February 16, 2013 Definitely a beginner. They look OK though. Intake is just cleaned and knifed. Little exhaust work to. There is nothing wrong with them from the photos you had posted. There is definitely enough material to rework them and get more out of 'em if you want to. Quote Link to comment Share on other sites More sharing options...
BeeCanBanshee Posted February 16, 2013 Author Report Share Posted February 16, 2013 Ok cool. Yea I started comparing mine to port job pictures I've seen around and they didn't look like any. Glad its decent and leaves room for more work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.