drizzyB Posted February 14, 2013 Report Share Posted February 14, 2013 Hi Im new to the forum and i had just started a top end rebuild on my banshee. It go to my profile to get info on the machine. But heres my problem im not new to building 2 stroke i was big into dirt bikes prior to having a banshee. My studs the come out of the case are literally refusing to come out i used the bolt to bolt trick i tried just about ever thing i could. So i took it to my local machine shop and he cant get them out cause he cant get the motor in the rite position on the mill. WHAT DO I DO DOES ANYONE KNOW MOTOR BUILDERS IN THE MIDEST AREA SPECIFICALLY WISCONSIN !!!!! Or a solution that would work Quote Link to comment Share on other sites More sharing options...
Nieskes Posted February 14, 2013 Report Share Posted February 14, 2013 Kroil them bitches !! What part of Wisconsin are you from? Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 Kroil them bitches !! What part of Wisconsin are you from? Kroil?? lol i have no idea what that is, im in the la crosse area i kinda didnt spell things rite in that post cause i was raging lol. I just picked up my bottom end from the machine shop and he couldnt do anything ? Quote Link to comment Share on other sites More sharing options...
fappy'97 Posted February 14, 2013 Report Share Posted February 14, 2013 Kroil is like, the best penetrating oil ever. Acetone and ATF is even better, if you have access to some... Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 14, 2013 Report Share Posted February 14, 2013 Why are you removing the case studs? Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted February 14, 2013 Report Share Posted February 14, 2013 Good to know. I need to change my studs since they old, rusty and one is bent. Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 Why are you removing the case studs? well im going to go the vitos 397 kit route i already have a +4 mill crank but the vitos kit come with new studs but i dont quite think the kroil will work and i broke one off in the process of the bolt to bolt idea FML!!! is there any banshee motor builders in the wisconsin, minnesota areaa Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted February 14, 2013 Report Share Posted February 14, 2013 well im going to go the vitos 397 kit route i already have a +4 mill crank but the vitos kit come with new studs but i dont quite think the kroil will work and i broke one off in the process of the bolt to bolt idea FML!!! is there any banshee motor builders in the wisconsin, minnesota areaa Some of those have been there for years and years so they are a big pain to remove. Hope I dont break the one that is bent. Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 Some of those have been there for years and years so they are a big pain to remove. Hope I dont break the one that is bent. yea i know rite be care and if i where you i would do the acetone mixed with atf and let it sit for atleast an hour then try the bolt to bolt but do it very carefully but on my end please help PEEPS!!! Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 14, 2013 Report Share Posted February 14, 2013 well im going to go the vitos 397 kit route i already have a +4 mill crank but the vitos kit come with new studs but i dont quite think the kroil will work and i broke one off in the process of the bolt to bolt idea FML!!! is there any banshee motor builders in the wisconsin, minnesota areaa you fucked up. the vitos kit comes with head studs. it does not require you to remove the case studs. Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 you fucked up. the vitos kit comes with head studs. it does not require you to remove the case studs. shit Your RITE!! I just actually seen that the studs i have are not in the greatest condition so what should i do Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted February 14, 2013 Report Share Posted February 14, 2013 take pictures. im confused if youve bent/broken them? Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 take pictures. im confused if youve bent/broken them? i only broke one but when i tooke off the jugs the studs the self just dont look to hot like the threads ill take a few pics tho Quote Link to comment Share on other sites More sharing options...
drizzyB Posted February 14, 2013 Author Report Share Posted February 14, 2013 i only broke one but when i tooke off the jugs the studs the self just dont look to hot like the threads ill take a few pics tho file://localhost/var/folders/hN/hNgeTdN+GFqSFFgkFrtDTk+++TI/-Tmp-/com.apple.PhotoBooth-T0x1001179c0.tmp.4EjLgi/Photo%20on%202013-02-14%20at%2015.41.jpg Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted February 14, 2013 Report Share Posted February 14, 2013 Try photobucket bud. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.