salmon_slayer06 Posted January 15, 2015 Report Share Posted January 15, 2015 This is what i use now. Quality part put they become loose where they clip onto plug. I still don't know if its safe to use MSD boots alone with standard plug wires on OEM coil. I don't want to ruin a good OEM coil. Quote Link to comment Share on other sites More sharing options...
Zillaguy Posted January 15, 2015 Report Share Posted January 15, 2015 I have been running the MSD plug ends for 3 yrs no issues. I also am running Taylor Spiro Core wires on the stock coil.. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted January 15, 2015 Report Share Posted January 15, 2015 Nology with hot wires. Accept no substitute. Quote Link to comment Share on other sites More sharing options...
salmon_slayer06 Posted January 16, 2015 Report Share Posted January 16, 2015 cool that answers my question. I have two good OEM coils and shouldn't need aftermarkets for a while. The wire tabs are broke but its no big deal. I use ultra gray on the wire and slide into coil. The air pushes out and when the stuff dires it takes quite a bit of force to pull them out. Water tight also. I've had a hard time finding any kind of coil for these let alone the stock ones. Quote Link to comment Share on other sites More sharing options...
camatv Posted January 16, 2015 Report Share Posted January 16, 2015 use NGK # 8020 cap better to get at a motorcycle store. is probably a 'special order" from o'reillys. my local dealer sells them for about 3.50 ish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.