papa-smurf Posted January 3, 2013 Report Share Posted January 3, 2013 I posted about this in general discussion but thought it was more applicable to this sub-forum. I came across these Mikuni VM round slide carbs for a steal. They are mint and I believe they are 34mm. I know its older technology; can these be used on a banshee? I have 28mm pwk's on my shee right now but I believe they have broken air screws. Would these carbs be too big for my setup or should I stick with my pwk's and get them looked at? Stock stroke Drag port and Bored T5's Pods with outerwear - no box VF2's What application would these carbs be used on? Thanks for looking! Quote Link to comment Share on other sites More sharing options...
JayCLL Posted January 3, 2013 Report Share Posted January 3, 2013 I used 39pwk's with my stock stroke, drag ported motor Quote Link to comment Share on other sites More sharing options...
papa-smurf Posted January 3, 2013 Author Report Share Posted January 3, 2013 Wow! Thanks for the input Quote Link to comment Share on other sites More sharing options...
FASTOYS Posted January 4, 2013 Report Share Posted January 4, 2013 They should work fine but always check with the guy that PORTED your mtr as he should know best. They look smaller than 34 to me but maybe not. Quote Link to comment Share on other sites More sharing options...
papa-smurf Posted January 4, 2013 Author Report Share Posted January 4, 2013 Thanks. I wanted to have these carbs in case I decide to move to serval & 4mil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.