Mattchev Posted December 19, 2012 Report Share Posted December 19, 2012 not sure of the exact terminology of this part. but i need the fender mount/fender stay/piece that supports the plastics so it isnt bouncing all over the place, for the rear fight side fender. connects the fender to the frame right behind my right leg. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted December 19, 2012 Report Share Posted December 19, 2012 You need to be a little more specific. There is supposed to be a tube welded to the frame that mounts the rear fender where it curves downward at the front part of the rear fender. If this part has been cut off and the frame powdercoated, I would fabricate an angle bracket off the unused stinger mount that's sort of in front of the silencer. Most people don't bother cutting that off. Bolt it up so you don't have to burn off the powdercoating. The other mount point goes off to the side from the grab bar and is part of the grab bar. Quote Link to comment Share on other sites More sharing options...
Banshee SE Posted December 20, 2012 Report Share Posted December 20, 2012 I think he's talking about the heels guard or the heel guard plastics Quote Link to comment Share on other sites More sharing options...
Mattchev Posted December 20, 2012 Author Report Share Posted December 20, 2012 Yeah there's a screw hole in the fender where it curves downward that's pretty close to the frame and there's another screw hole on the fender that was where the heel guards were connected to it. I didn't know if there was an actual piece that is sold that connects the fender to the frame by the screw hole that's closer to the frame, not the heel guard screw hole. Hope that was a little better description. Quote Link to comment Share on other sites More sharing options...
Finch Posted December 20, 2012 Report Share Posted December 20, 2012 that piece should be welded onto the frame get us a pic Quote Link to comment Share on other sites More sharing options...
Nightmare Posted December 20, 2012 Report Share Posted December 20, 2012 I'll bet the subframe is shaved. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Starwriter Posted December 20, 2012 Report Share Posted December 20, 2012 Originally it looked like this. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.