Anthony133 Posted December 13, 2012 Report Share Posted December 13, 2012 I have a really ugly, gay, sagging set of purple plactics that i want to fully race cut and have painted/ airbrushed or whatever will last. Ive never cut fenders so how do i do it? I was going to measure and mark dots to kinda guide myself so both sides are equal but my main questions is what do i cut them with? What is the easiest, fasted and best way to do this? I have razor blades and stanly knifes, will those work? Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted December 13, 2012 Report Share Posted December 13, 2012 tape them off and mark em and use a jigsaw, hot knife, cutoff wheel etc Quote Link to comment Share on other sites More sharing options...
possum Posted December 13, 2012 Report Share Posted December 13, 2012 use tape to mask off the lines then get a cutoff wheel and u can get a perfect straight line easier. jigsaw is second best. but cant really get in tight if u need to. Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted December 13, 2012 Report Share Posted December 13, 2012 Chainsaw Quote Link to comment Share on other sites More sharing options...
Nightmare Posted December 13, 2012 Report Share Posted December 13, 2012 Your teeth:lol: Band saw works good. Sent from my SGH-T679 using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Hibnecker1 Posted December 13, 2012 Report Share Posted December 13, 2012 i used a sawsall to get them trimmed down then a sanding drum on a drill to smooth them out and finished with a buffing wheel... looked good till i got new plastics Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted December 13, 2012 Report Share Posted December 13, 2012 best way to cut them, is off. Quote Link to comment Share on other sites More sharing options...
lms1977 Posted December 13, 2012 Report Share Posted December 13, 2012 I used a sawzal and then sanded them smooth and shaped them Quote Link to comment Share on other sites More sharing options...
wfobasheeboy Posted December 13, 2012 Report Share Posted December 13, 2012 tape them off and mark em and use a jigsaw, hot knife, cutoff wheel etc X2^^^ I taped them and used a box cuter with a new blade for each fender. Then sanded with scotch-brite pad. Quote Link to comment Share on other sites More sharing options...
Glenyboy Posted December 13, 2012 Report Share Posted December 13, 2012 1 Quote Link to comment Share on other sites More sharing options...
fappy'97 Posted December 13, 2012 Report Share Posted December 13, 2012 I've always used just a utility knife, and then sand down until the angle and finish is how you want. After that I always take a heatgun or torch to make it glossy... Quote Link to comment Share on other sites More sharing options...
Buckwheat Posted December 16, 2012 Report Share Posted December 16, 2012 Chainsaw You beat me too it! Quote Link to comment Share on other sites More sharing options...
tecate3matt Posted January 27, 2013 Report Share Posted January 27, 2013 Rusty axe... MERICA. I used a dremel tool with cut off wheel. Then sanded the edges back. Quote Link to comment Share on other sites More sharing options...
Sandking Posted January 27, 2013 Report Share Posted January 27, 2013 Jigsaw then beltsander quick and easy Quote Link to comment Share on other sites More sharing options...
t3h hott! Posted January 29, 2013 Report Share Posted January 29, 2013 nooo dont cut them! trade them i have race cut black plastics... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.