Jump to content

Got her running for the first time but....


ric-ross1

Recommended Posts

like the tittle says i broke her in,was idleing on its own,still starts first kick, drove it with 25% throttle and it was running really good was going to adjust the throttle cable and as i was driving back it boged down, its like a bopbopbop sound, i tried adjusting the air screw but stil did it, carbs were dial in right sync wise before she started running.

 

thanks guys

Link to comment
Share on other sites

Did you turn chokes off, does it still fire on first kick? What about jetting

 

if i pull choke is first kick or second if i kick it right never kicked before lol and they jetting was fine i mean it ran and everything smoked like a too stroke is supposed to.

Did you leave the tors or parking brake plugged in

 

this bike didnt come with tors when i got it and the parking brake aseembly doest have the bolt and the cable is cut.

Link to comment
Share on other sites

Are the boxes still plugged in on the harness tho ?

what boxes??

 

I think i founf out whats wrong the main jet broke inside the nozzle and the top part was under the float with the washer looked like it was covering a hole on the bottom of the carb so i went ahead and ordered a new nozzle, new mains since the one that broke had a bigger hole then the left side. I hope thats what it is.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...