Jump to content

Going from stock to 28 PWK's jetting help


Recommended Posts

Should be getting my 28 pwk's any day now.  I need you guys to get me close with the jetting on the 28 pwk's. Right now I am running stock carbs with 340 mains, 27.5 pilots, stock needle 3rd clip, 1 turn out on air screws with k/n pods at sea level. My engine mods are toomy T5's, noss head 18cc domes, HJR dune/play port, stock stroke, v force 3's, 6 degree timing advance, lighten flywheel. What jetting on the 28 pwk's should I start with? What extra jets should I get to fine tune? 

Link to comment
Share on other sites

I just went through the same thing and have a very similar setup.  I'm running a little bigger dome (20cc) and less timing (4) but the similar porting and the same pipes and I'm running 150 mj and a 45 pilot.  I would have 45, 48, and 50 pilots available with main jets from 150-162 available so you'll be covered not only for winter jetting but also for next summer.  You might ask Kevin @HJR and see what he says.

Link to comment
Share on other sites

What needle you running?

I just went through the same thing and have a very similar setup. I'm running a little bigger dome (20cc) and less timing (4) but the similar porting and the same pipes and I'm running 150 mj and a 45 pilot. I would have 45, 48, and 50 pilots available with main jets from 150-162 available so you'll be covered not only for winter jetting but also for next summer. You might ask Kevin @HJR and see what he says.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...