registered user Posted September 27, 2013 Report Share Posted September 27, 2013 i like pwk but pj aint bad. not real impressed with lectron Quote Link to comment Share on other sites More sharing options...
Coupelx Posted September 27, 2013 Report Share Posted September 27, 2013 Pjs are the ones no one can tune. Just gotta ditch the faggy idle shit they have. Profit. Quote Link to comment Share on other sites More sharing options...
Nieskes Posted September 27, 2013 Report Share Posted September 27, 2013 I ran my 34pjs for 3 years never had a issue I LOVED them. Quote Link to comment Share on other sites More sharing options...
camatv Posted September 27, 2013 Report Share Posted September 27, 2013 to me the pj's are a decent carb. they don't seem to have the low end response as the pwk's have. but either work just fine. ( with new needle and seats and very particular float settings) how can you not like lectron.? they jet so easy dont have as bad of weather issues and are really simple. biggest problem i have with them is the slides they REALLY need chrome plated or even nicko slides in them they are really prone to stick Quote Link to comment Share on other sites More sharing options...
joshb Posted September 28, 2013 Report Share Posted September 28, 2013 to me the pj's are a decent carb. they don't seem to have the low end response as the pwk's have. but either work just fine. ( with new needle and seats and very particular float settings) how can you not like lectron.? they jet so easy dont have as bad of weather issues and are really simple. biggest problem i have with them is the slides they REALLY need chrome plated or even nicko slides in them they are really prone to stick put a lil benol on em and they slick right up lol Quote Link to comment Share on other sites More sharing options...
camatv Posted September 28, 2013 Report Share Posted September 28, 2013 ha ha naw that makes it worse! they tend to loosen up after its ran a bit but then have a tendency to stick at inopportune times. dosent happen often but plated slides move o so easy Quote Link to comment Share on other sites More sharing options...
99michael Posted October 11, 2013 Report Share Posted October 11, 2013 Got another email. To Our Pre-Order Customers, This is an update for our SmartCarb pre-order customers on the progress of cast 38mm SmartCarb durability testing and production timeline. American Performance Technologies is pleased to announce that the in-house comprehensive durability testing phase is complete. External durability testing by riders in the field will remain ongoing as we continually look for ways to improve and refine our technology. Minor wear and durability related issues have been addressed and appropriate changes have been made to final casting and machining of 38mm cast SmartCarbs. Float bowl baffling has been markedly improved to reduce chances of fuel cavitation/bogging and new floats will minimize flooding issues and reduce part count and complexity. By taking the time necessary to complete comprehensive durability testing, we feel that we have satisfied our obligations to ensure that our product meets and exceeds the high quality expectations of our customers. Today our supplier has announced that we will not be receiving production castings on October 8 as promised. Our supplier has assured us that SmartCarb castings will begin arriving, fully machined and ready for assembly, starting October 22. APT will then begin shipping them out to pre-order customers as we build them on a first-ordered, first-received basis. As always, American Performance Technologies appreciates your patience and support. After APT receives this first run of 38mm cast carbs, we will quickly move in casting other sizes. Unfortunately, this means that there will be a considerable amount of time before we produce another run of SmartCarbs in the 38mm size. After current pre-order quantities are satisfied, we estimate that there will only be 100 cast 38s in this first run that will go into on-the-shelf inventory. APT expects that shelf stock of 38mm carbs to be depleted quickly due to high demand. If you want to get your hands on one of these remaining 38mm cast SmartCarbs, we encourage any who are interested to go to our website, www.powerapt.com, and pre-order. We will keep you up-to-date and a notification will be sent to your email once your SmartCarb has been shipped. If you have any questions or concerns, please give us a call at 1-877-372-3465. Best Regards! APT SmartCarb Team Quote Link to comment Share on other sites More sharing options...
joshb Posted October 12, 2013 Report Share Posted October 12, 2013 Got some first hand info on these things. I think I'll be getting a set Quote Link to comment Share on other sites More sharing options...
RagunCajun Posted October 12, 2013 Report Share Posted October 12, 2013 between this thread and the one in thumper talk's 2 stroke dirtbike section, ive seen tons of "updates"s from that company. They are delaying the ever living hell out of them carbs. Quote Link to comment Share on other sites More sharing options...
99michael Posted October 31, 2013 Report Share Posted October 31, 2013 (edited) Edited October 31, 2013 by 99michael Quote Link to comment Share on other sites More sharing options...
Deadbeat Posted October 31, 2013 Report Share Posted October 31, 2013 gogogadget eyes Quote Link to comment Share on other sites More sharing options...
99michael Posted October 31, 2013 Report Share Posted October 31, 2013 (edited) https://b9c8ba678b-custmedia.vresp.com/library/1383161301/787bf1c7d4/Executive_Summary_10_23_2013.jpg Mabey that'll work better.lol Edited October 31, 2013 by 99michael Quote Link to comment Share on other sites More sharing options...
joshb Posted October 31, 2013 Report Share Posted October 31, 2013 Yea I had heard gas gas was in love with those things Quote Link to comment Share on other sites More sharing options...
KaN Powersports Posted November 7, 2013 Report Share Posted November 7, 2013 Pushing a year, and no one has personally tried these out yet? I realize they barely made the cast one available, but no 'hands on' review? Anyone?? Quote Link to comment Share on other sites More sharing options...
joshb Posted November 7, 2013 Report Share Posted November 7, 2013 I spoke with a guy who was personally involved, has hands on experience....he said that they are everything they claim. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.