01bansheefox Posted November 30, 2012 Report Share Posted November 30, 2012 Stock carbs, dmc 916s, toomey 1 into 2 filter bike was lean so I.changed the stock pilot to 27.5 and mains to 300, now it idles high, cant figure out why.... Quote Link to comment Share on other sites More sharing options...
dajogejr Posted November 30, 2012 Report Share Posted November 30, 2012 Is it possible you put the wrong slide in the wrong carb? Is the carb slide fully seated? Looking in through the back of the carb, do you see the little half moon shaped cut away on the bottom of the slide? Is the choke tube in place? Quote Link to comment Share on other sites More sharing options...
01bansheefox Posted November 30, 2012 Author Report Share Posted November 30, 2012 Slides are good, choke tube is on.... Its not a high rev but higher than normal, can something be adjusted? Quote Link to comment Share on other sites More sharing options...
01bansheefox Posted December 2, 2012 Author Report Share Posted December 2, 2012 Also has a bog at beginning when throttle is used Quote Link to comment Share on other sites More sharing options...
Finch Posted December 2, 2012 Report Share Posted December 2, 2012 play with the air screws and idle? Quote Link to comment Share on other sites More sharing options...
01bansheefox Posted December 2, 2012 Author Report Share Posted December 2, 2012 Air screws affect idle? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.