ric-ross1 Posted November 29, 2012 Report Share Posted November 29, 2012 alright so here is the deal, i get all of the parts i was missing from yamaha tomorrow so the motor get put on after work now i have couple questions, i will rebuild my stock carbs tonight because i get them later, i have fmf pipes and open lid air box with the pro desing flow(WHAT INTAKE DO I NEED TO GET) seen couple on the web but not sure which one i need, How about the jetting for those 2 things on a fresh stock motor??? thanks in advance guys. Quote Link to comment Share on other sites More sharing options...
special06shee Posted November 29, 2012 Report Share Posted November 29, 2012 Do you mean intake boots?? If so the stock ones will work! Your jetting will fall between 260-300 depending on temps and elevation! Quote Link to comment Share on other sites More sharing options...
04zSpittinKlotz Posted November 29, 2012 Report Share Posted November 29, 2012 http://www.dfn.com/agservices/jetfaq.html Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted November 29, 2012 Author Report Share Posted November 29, 2012 My bad, i mean the actual filter itself because i dont have one i have the intake box and the pro design plate but is not round its oval and i am in Georgia which is 1,138 ft (347 m). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.