ric-ross1 Posted November 20, 2012 Report Share Posted November 20, 2012 So i picked up a banshee crank, connecting rods are in great shape but i was spinning the left side bearing and it was making noises, that side was dry but the other side had alot of grease on it so it didnt make noise, i put some pb blaster on it but still sounds the same, i tried moving it up and down and side to side but it would not move at all. Really appreciate your input guys. Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted November 20, 2012 Report Share Posted November 20, 2012 stock crank ? if its a stock crank, id send it to a shop and get it trued and welded, checked out and 2 outer bearings put on. Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted November 20, 2012 Author Report Share Posted November 20, 2012 yes it is a stock crank, i really want to get her running for a while and im going to get a stroker kit for it down the road maybe tax time but as of now i want to have a running banshee not one without a motor lol. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted November 21, 2012 Report Share Posted November 21, 2012 yes it is a stock crank, i really want to get her running for a while and im going to get a stroker kit for it down the road maybe tax time but as of now i want to have a running banshee not one without a motor lol. So I'm just gonna be straight with you. Put it together then if you have no patience. It's cheap insurance. But if you do put it back together and it fucking explodes, don't come back asking what happened and complaining. It's your own fault for not taking advice and rushing Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted November 21, 2012 Author Report Share Posted November 21, 2012 Thanks for the honesty, it does spin but has that little noise any machine shop can press those? Quote Link to comment Share on other sites More sharing options...
421alkybanshee Posted November 21, 2012 Report Share Posted November 21, 2012 dude, spend the little extra and have it trued and welded by a site sponsor. there are plenty on here that will help you. Done deal! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.