blowit Posted November 13, 2012 Report Posted November 13, 2012 That's a 13 x 40 Smithy Granite with .0005" z-axis DRO and .0001" X and Y. While it's certainly not a Hass 5 axis CNC machine, it is more than adequate for the work being done. What milling machine do you have? Any pictures? I certainly don't stir the pot much anymore but most any machine shop of some stature does not regard a "Hass" (Actually Haas), much of a precision machine. They are the Chevy of the machine world. Every one has them but not to be confused with a Porche. However, I CERTAINLY do not see much wrong with your efforts. I could throw a bunch of rocks at setup, tooling, etc, but as you already know, everyone has to learn it if they want to move forward. Break tools, break parts, "try" not to break machines, etc. It looks like you are making the proper efforts to improve yourself. Quote
Nightmare Posted November 13, 2012 Report Posted November 13, 2012 So, how about a poll? Mull head or ghetto set up Blaster Forum guy head? Your call... MULL Quote
okbeast Posted November 13, 2012 Report Posted November 13, 2012 Nudz of wife, unless that troll in your avatar is her Quote
special06shee Posted November 13, 2012 Report Posted November 13, 2012 Well i say nice work!! I will not be buying or using a stock head anytime soon but i will give props to anyone("redneck", or "pro") that can fix something fuck up! Good job dude! Quote
sicivicdude Posted November 13, 2012 Author Report Posted November 13, 2012 (edited) I certainly don't stir the pot much anymore but most any machine shop of some stature does not regard a "Hass" (Actually Haas), much of a precision machine. They are the Chevy of the machine world. Every one has them but not to be confused with a Porche. However, I CERTAINLY do not see much wrong with your efforts. I could throw a bunch of rocks at setup, tooling, etc, but as you already know, everyone has to learn it if they want to move forward. Break tools, break parts, "try" not to break machines, etc. It looks like you are making the proper efforts to improve yourself. I mispelled Haas, sorry. Their machining centers are a HECK of a lot nicer than anything I have or have access to. I'd be happy with a Chevy considering I'm riding a bicycle at the moment! For the record, I didn't know you (or anyone) did this work in particular. The head pictured is one I was given for freebies and decided to "play" with to help out a buddy. I didn't go about advertising this to begin with.... Read back through the thread. Someone else asking how much so I answered. I wouldn't blame anyone for going with someone else, just figured I'd throw my lot in the hat. I do appreciate your kind words and would be willing to listen to a few rocks (gently thrown mind you) as I try to learn everything I can. Thanks everyone for the attention. Matt, everyone who feeds you sugar isn't your friend. Be careful what you read from that "anonymous" member you got a PM from. Edited November 13, 2012 by sicivicdude Quote
sicivicdude Posted November 13, 2012 Author Report Posted November 13, 2012 Well i say nice work!! I will not be buying or using a stock head anytime soon but i will give props to anyone("redneck", or "pro") that can fix something fuck up! Good job dude! LOL This certainly isn't for everyone. The particular head setup is for someone who values that stock look. Quote
THE358BANSH Posted November 13, 2012 Report Posted November 13, 2012 I would be leery of using the spark plug threads for your centering. I have seen a few that are .040" off center compared to the bores. Other than that it looks pretty nice for what you are working with. Quote
sicivicdude Posted November 13, 2012 Author Report Posted November 13, 2012 I would be leery of using the spark plug threads for your centering. I have seen a few that are .040" off center compared to the bores. Other than that it looks pretty nice for what you are working with. None of these I've run across have had that issue but I have seen blaster heads (what I have a LOT more experience with mainly because my old lathe didn't have enough swing over the bed to turn a banshee head!) with that issue. Seems yamaha wasn't terribly accurate in their machining processes. I certainly will be on the lookout for that issue before I throw one into the machine. Any other nuggets of wisdom you'd like to impart (not being a smartass here, actually asking for any other information you could bestow) Quote
So Cal Suspension Posted November 13, 2012 Report Posted November 13, 2012 Matt, everyone who feeds you sugar isn't your friend. Be careful what you read from that "anonymous" member you got a PM from. There was actually two of them... Have they given me any misinformation thus far? ...Didn't think so... Quote
fappy'97 Posted November 13, 2012 Report Posted November 13, 2012 Is this the godfather of blasters?? KOC himself?? Nah, if it was KOC, he would have been using a paper template for dome sizing and some sort if Dremel for surfacing. Quote
sicivicdude Posted November 13, 2012 Author Report Posted November 13, 2012 There was actually two of them... Have they given me any misinformation thus far? ...Didn't think so... No misinformation exactly, but I'm sure cast in the worst possible light. I've ruffled as many feathers there as I undoubtedly will here so I have a "fan club" as you might call it. I learn by doing. With that comes mis-steps. Those mis-steps can either haunt or empower you. I choose to let them empower me to do better next time. Quote
Nightmare Posted November 13, 2012 Report Posted November 13, 2012 He said mull's pics are photoshopped. Sent from my SGH-T679 using Tapatalk 2 Quote
sicivicdude Posted November 13, 2012 Author Report Posted November 13, 2012 He said mull's pics are photoshopped. Sent from my SGH-T679 using Tapatalk 2 What I meant by that statement is that the idea behind the work is the same, he has REALLY good photographs on his website. Quote
lms1977 Posted November 13, 2012 Report Posted November 13, 2012 I do machining for a living .. I give you props for doing what your doing on your 3 in 1 mill lathe setup Quote
cattledog Posted November 13, 2012 Report Posted November 13, 2012 You boys kill me, evrytime a guy trys to start out from his garage or even shed you guys beat him down, its not possible, cant be done, blah blah blah, time to stfu, you know ho many nascar or nhra drag guys started out in a old barn or garage with a dirt floor? 100`s and they beat many of the big shops with thier backyard home built cars. how many privateer mx racers started from doing thier own work in some shit hole? tons. and they became national sponsered racers. Apparently you all have to much money or no inginuity on how to do stuff yourself, Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.