Justintoxicated Posted October 8, 2003 Report Share Posted October 8, 2003 Im looking for a place that can gaurante me a certain HP, and that will take the time to work out exactly what I need from a port job. I want to get porting or at least some engine work done really soon but im new to taking apart the engine and everything so I don't know where to start. Quote Link to comment Share on other sites More sharing options...
MRMOONEY Posted October 9, 2003 Report Share Posted October 9, 2003 call dave moore from mp racing he'll get you excatly what you need, tell him dustin sent you, visit the web site they build some awesome shit man, mpracing.net Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted October 11, 2003 Author Report Share Posted October 11, 2003 can i get the links and number? Quote Link to comment Share on other sites More sharing options...
White96Banshee Posted October 12, 2003 Report Share Posted October 12, 2003 Where are you located at? There are lots of good builers all over the US. Quote Link to comment Share on other sites More sharing options...
Dragg-on Posted October 12, 2003 Report Share Posted October 12, 2003 check out this page http://www.dynoedge.com/porting.html I see some Horse power numbers Quote Link to comment Share on other sites More sharing options...
White96Banshee Posted October 13, 2003 Report Share Posted October 13, 2003 I was going to recommend Dynoedge too, but if you live in Cali or something, I didn't know if you would want to ship! Quote Link to comment Share on other sites More sharing options...
Justintoxicated Posted October 13, 2003 Author Report Share Posted October 13, 2003 I live in San Diego Cali, I ride glamis and would like to have some fun at the hill but especialy on long dune rides. There are preformance shops all over, but if someone gives me a good deal I don't mind shipping things out. I have to take my time with this one since its a one time thing. Right now the best offers I have had seem to be Veys, Sam Co., Patriot racing, and Passion racing. Sam Co and Veys are local but probably more expensive. I need the total cost to be under $700 cylinders honed, new head, pistions rings and gaskets. Also I have never taken my top end off before but my PSI is about 115 105. 4 years on this topend. Quote Link to comment Share on other sites More sharing options...
Dragg-on Posted October 16, 2003 Report Share Posted October 16, 2003 I live in San Diego, and sent mine to Dyno-edge, had no problems Quote Link to comment Share on other sites More sharing options...
dragbanshee02 Posted October 16, 2003 Report Share Posted October 16, 2003 give passionre a hollar he is on this site his name is jim just had my bike done by him and it flat out flies i can pull the wheels off the ground in 6th gear in a 300 foot drag race and it carries them for most of the track tell him don sent you he will hook you up with exactly what you want and his turn around time is quick. Quote Link to comment Share on other sites More sharing options...
camatv Posted October 16, 2003 Report Share Posted October 16, 2003 dou you have a picture of this port job?? and maybe passion's website, phone number? please describe the 12 port design?? Quote Link to comment Share on other sites More sharing options...
White96Banshee Posted October 16, 2003 Report Share Posted October 16, 2003 PM CP5899 he is out in your area, and he has built some pretty bad ass stuff. He does a lot of custom stuff. It would definately be worth your time to PM him. Quote Link to comment Share on other sites More sharing options...
dragbanshee02 Posted October 16, 2003 Report Share Posted October 16, 2003 Pm passionre he will explain all this to you it is well worth having him do your port work my bike flat out flies Quote Link to comment Share on other sites More sharing options...
PassionRE Posted October 17, 2003 Report Share Posted October 17, 2003 Camatv, Im currently trying to build my website, but it's going a little slow..not really my thing. You can contact me at 918-232-3950 if need info on my drag port...Jim Quote Link to comment Share on other sites More sharing options...
SandTrix Posted October 21, 2003 Report Share Posted October 21, 2003 do you ever do any drag racing at LS?? im surprised I havent heard of you since i to build motors near your area. Quote Link to comment Share on other sites More sharing options...
camatv Posted October 21, 2003 Report Share Posted October 21, 2003 i run at little sahara also and i dont recall anything with passion engines on it either i know of the sadntrix guys their r's and the banshee haul butt i hope my 330r will be that fast someday but then again the passion guys may just be getting started or dont t-shirt advertise like a lot of others in this area... i need a degree spec for a good drag exhaust port i have heard that 196degree opening is good i am going to buy a wheel and try this on the p.o.s. 410 ct cylinder that i have. any help?? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.