ric-ross1 Posted October 19, 2012 Report Share Posted October 19, 2012 hello there guys, i picked up a nice powercoted frame with a motor and all the plastics,gas tank,radiator, harness etc now im missing alot more things which im ordering or already have but i have couple questions about a few parts. 1-Will 97 Yamaha Banshee YFZ350 YFZ 350 Steering Stem Assembly fit any frame?? i got bill of sale but not tittle so dont know but the guy said it was 2003 if im not mistaken. 2-Will Yamaha Banshee A-arms and spindles fit any banshee frame? he said it was A frame since is the newer frame. 3-Are all the banshee swing arms the same? i mean do they all fit all year banshee frames? thanks in advance. Quote Link to comment Share on other sites More sharing options...
Wildcard2 Posted October 19, 2012 Report Share Posted October 19, 2012 Yes the steering stem would fit fine. if you are talking OEM a-arms then yes they will fit any frame. Also If the swingarm you are asking about it the OEM part then it will fit your frame. On the other hand aftermarket a-arms are made to fit any year but they might be for a specific set up. ask questions before buying a part. This goes for the swingarm as well, it will fit any year but it may end up to long to short or need more aftermarket parts to make it right. Quote Link to comment Share on other sites More sharing options...
ginger Posted October 19, 2012 Report Share Posted October 19, 2012 heres my suggestions. Steering stem, your fine, any year swaps around. A arms, a arms will fit any a arm frame, only thing that is different throught the years was that there used to be J arms in the early years. i suggest since you dont have any to pick of a used set that is wider and better. Swing arm, should fit any year, i would purchase a round house sing arm because the factory set up sucks dick Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted October 19, 2012 Author Report Share Posted October 19, 2012 Yes the steering stem would fit fine. if you are talking OEM a-arms then yes they will fit any frame. Also If the swingarm you are asking about it the OEM part then it will fit your frame. On the other hand aftermarket a-arms are made to fit any year but they might be for a specific set up. ask questions before buying a part. This goes for the swingarm as well, it will fit any year but it may end up to long to short or need more aftermarket parts to make it right. heres my suggestions. Steering stem, your fine, any year swaps around. A arms, a arms will fit any a arm frame, only thing that is different throught the years was that there used to be J arms in the early years. i suggest since you dont have any to pick of a used set that is wider and better. Swing arm, should fit any year, i would purchase a round house sing arm because the factory set up sucks dick Thanks alot guys, i just order those from ebay. got it last night and already have the motor apart and ordering new parts. Quote Link to comment Share on other sites More sharing options...
dunesovertrails Posted October 19, 2012 Report Share Posted October 19, 2012 Thanks alot guys, i just order those from ebay. got it last night and already have the motor apart and ordering new parts. Can you post up some pics of everything? Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted October 19, 2012 Author Report Share Posted October 19, 2012 Can you post up some pics of everything? sure can, the mayority of the parts are on the way but i will take some of the ones i have in a little about to leave work and go work on the shee. Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted October 20, 2012 Author Report Share Posted October 20, 2012 Here are the only ones i have so far, like i said the swing arn, front assembly, clutch all those things are on the way with some other goodys. ohh and off topic my dd. Quote Link to comment Share on other sites More sharing options...
Starwriter Posted October 20, 2012 Report Share Posted October 20, 2012 (edited) Wow! You didn't get much. I hope you realize it's going to cost you about $2,500 to piece that together, above whatever you paid for that. Edited October 20, 2012 by Starwriter Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted October 20, 2012 Author Report Share Posted October 20, 2012 (edited) Wow! You didn't get much. I hope you realize it's going to cost you about $2,500 to piece that together, above whatever you paid for that. i got more then just that i already have everything but rims and tires ,the rear brake assembly and work on that motor lol. Edited October 20, 2012 by ricardo1 Quote Link to comment Share on other sites More sharing options...
shakar Posted October 21, 2012 Report Share Posted October 21, 2012 man... thats surely a weird looking shifter you got there.must be a custom jobie Quote Link to comment Share on other sites More sharing options...
ric-ross1 Posted October 22, 2012 Author Report Share Posted October 22, 2012 man... thats surely a weird looking shifter you got there.must be a custom jobie yea i said the same thing, should get the parts this week to put it all together just need a seat and waiting for the micrometer to check the bore and get me pistons for it etc. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.