cameronchaos Posted October 12, 2012 Report Share Posted October 12, 2012 So i did a plug chop today and i have no experience with this at all so i was hoping some of yall could tell me what my motor is trying to tell me Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted October 12, 2012 Report Share Posted October 12, 2012 Take pics of the other side of the plugs too. ( flip em over) Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 12, 2012 Author Report Share Posted October 12, 2012 Take pics of the other side of the plugs too. ( flip em over) Well i didnt think to do that and i already left the farm but the other side has a brown ring around it just like you can see on the edge of the plugs i will takes pics tommorow Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 13, 2012 Author Report Share Posted October 13, 2012 Take pics of the other side of the plugs too. ( flip em over) I took pictures of the other side any help is greatly appreciated Quote Link to comment Share on other sites More sharing options...
dozer Posted October 13, 2012 Report Share Posted October 13, 2012 (edited) looks like it is slightly rich to me. not by much. i should have said this first: you should post up some details of your combo (i.e. engine size, jet size etc) and your elevation. Edited October 13, 2012 by dozer Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 13, 2012 Author Report Share Posted October 13, 2012 Is it normal for it to have that spot on one side of the plug like in the first pics that i posted up Its really hard to start sometimes until its warmed up then it fires right up My setup is Toomey t5s Stock carbs 320 main 27.5 pilot Uni air filter no lid on the air box and the box its self is drilled and cut its just there to keep dirt down Cool head 20 cc domes Stock cylinders with F.a.s.t clean up port V force 4s Boost bottle +4 timing I think thats every thing And my elavation is about 900 to 1000 Quote Link to comment Share on other sites More sharing options...
dozer Posted October 13, 2012 Report Share Posted October 13, 2012 stock stroke? how many turns out on the air screws? when my plugs looked like the first pics you posted i was 2 or 3 sizes too large on the main. Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 13, 2012 Author Report Share Posted October 13, 2012 Yes stock stroke and the air screws are 2 and a 1/2 turns out Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 14, 2012 Author Report Share Posted October 14, 2012 So i guess im rich? Anyone else got an opinion Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted October 15, 2012 Report Share Posted October 15, 2012 320 sounds rich. i was at 290 with pods on my old setup but i didnt have any portwork. Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 15, 2012 Author Report Share Posted October 15, 2012 320 sounds rich. i was at 290 with pods on my old setup but i didnt have any portwork. Well I have a 300 I can put in and try should I order a bigger pilot jet considering it's hard to start what else would cause it to be hard to start Quote Link to comment Share on other sites More sharing options...
thomas h. Posted October 15, 2012 Report Share Posted October 15, 2012 The choke not closing all the way. Bad reeds. Not useing the choke properly. Carb sync. Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted October 15, 2012 Author Report Share Posted October 15, 2012 The choke not closing all the way. Bad reeds. Not useing the choke properly. Carb sync. The choke im not sure of but the reeds are two weeks old v force4s Possibly a carb sync but it runs good on top end idk if it would make a difference or not. Quote Link to comment Share on other sites More sharing options...
Bkm2006 Posted October 27, 2012 Report Share Posted October 27, 2012 1. clean carbs good all jets and holes even clean out the choke. 2. sync carbs. 3. turn a/f screw 1.5 out. 4. needle middle clip. 5. keep in 320 even though that sounds a bit rich. do another plug chop. your going to need more jets! but do another plug chop to see, make sure you go threw all the gears and rev it out good! . being hard to start when cold might be due to compression, how old is the topend and have you done a compression check? Quote Link to comment Share on other sites More sharing options...
cameronchaos Posted November 10, 2012 Author Report Share Posted November 10, 2012 Just rebuilt it. It might have 7 hours on it if that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.