yamahaman244 Posted October 12, 2012 Report Share Posted October 12, 2012 Hey guys I'm in the process of rebuilding my motor and I wanna get ride of the boost bottle I have 28m carbs with pro design intake now qustion is Can I use some 1211 gasket maker and just plug them and get rid of boost bottle? Quote Link to comment Share on other sites More sharing options...
Finch Posted October 12, 2012 Report Share Posted October 12, 2012 why not get intakes that dont have a cross over or ditch the boost bottle and get a stock cross over Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted October 12, 2012 Report Share Posted October 12, 2012 Id just put a crossover tube in to be safe. Not worth the risk. Quote Link to comment Share on other sites More sharing options...
yamahaman244 Posted October 12, 2012 Author Report Share Posted October 12, 2012 That's what I was thinking but idk if a stock cross over tube will fit in the 28mm intakes cause there prodesign Quote Link to comment Share on other sites More sharing options...
Dicklez Posted October 12, 2012 Report Share Posted October 12, 2012 It will fit. Just dont fill the holes with 1211. That would be idiotic. Plug them with pipe fittings or something before you do that shit. Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted October 12, 2012 Report Share Posted October 12, 2012 This is what i did Chance, with the PD intakes. Cut a automotive fuel line to length (I cant remeber I.D size off hand). Hucked a Gates Unicoil on ($5) so it didn't kink and BAM clamped it on. Or plug them with hose and a bolt per side and clamps. It was going to be a quick fix when i did it, but it has held up fine for a few years so i left it be. Too the dummies above, the PD intakes take a different style bottle, the stock x-over wont work. I can check on the size if you need it... Quote Link to comment Share on other sites More sharing options...
yamahaman244 Posted October 12, 2012 Author Report Share Posted October 12, 2012 Thanks salvage that's a good idea and ya that's what I was trying to say to them it's differant and won't fit a stock tube' Chris what the hell u been up to I havet heard from u Im fucken years lol Quote Link to comment Share on other sites More sharing options...
Finch Posted October 12, 2012 Report Share Posted October 12, 2012 i like the sav i got trinity intakes and gotta have a lil piece of hose then the cross over may try that! if ya find out the size let us know. Quote Link to comment Share on other sites More sharing options...
Dicklez Posted October 12, 2012 Report Share Posted October 12, 2012 Too the dummies above, the PD intakes take a different style bottle, the stock x-over wont work. Learn something everyday. homo lol Quote Link to comment Share on other sites More sharing options...
vulvafan537240 Posted October 12, 2012 Report Share Posted October 12, 2012 Thanks salvage that's a good idea Quote Link to comment Share on other sites More sharing options...
Paulie B Posted October 14, 2012 Report Share Posted October 14, 2012 A hardware store like true value should have rubber plugs. Think the kind that goes on top of the beakers in science class. 2 of them and 2 hose clamps would be a quick easy fix. I use them to plug my exhaust before a wash. Savage I heard if you lengthen that hose by about 6ft and route all around your frame it gives you a super boost bottle effect- about 5hp per foot Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted October 14, 2012 Report Share Posted October 14, 2012 Savage I heard if you lengthen that hose by about 6ft and route all around your frame it gives you a super boost bottle effect- about 5hp per foot Well i tried 5ft at first, and didn't notice much gain, so i down sized Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.