jtraptor660 Posted September 12, 2012 Report Share Posted September 12, 2012 (edited) 10mm cub fully drag ported by D&M here in AZ 68mm cylinders 1-5 over ride n in the middle crank works crank OOF shearers 39mm alky khiens billet bowls +10 proformance prototypes arched swinger jj&a drag axle with billet housing billet side cover lock up spindle mounts on smoothies drag cut rear with 22x11x8 12sls's marvin shaws fill bore plastic, black oversized radiator. The chassis i got off of wannaplay from here and got shafted it can be read in the resolution section. since ive had the front end and the motor mounts redone by metal tech here in AZ. its a +4 in the front from what i can tell. Aarm set up. I traded my 450 for the motor. was told it had 119-121hp in stock chassis. dont know a whole lot of internals other than ive put probably give or take 30 passes on it and it was new other then dyno time when i got it. frame was powdered green but have since had some work done to chassis and needs another powder job. the aarms steering stem and swinger are a dark metallic green and powder looks good on them. NO TITLE as the frame was a custom build but i can generate a bill of sale. un sure what these are goin for today but im hoping to get no less then 6k for it. not wanting to ship so locally only (AZ/CA/NM/NV) and as of yet im not sure if i would part it out unless i got decent offers on the motor and chassis. i have pics on my phone and if you would like some please txt me at 623-341-3516 or email me at itsmejojo12@hotmail.com as im not on here often. i am getting out of drag racing and wanting to get a family toy. rhinos or sandrails. would be open to trades for some kind of family toy. rail rollers. i found this link of my build pics. http://forums.atvdra...0mm-drag-build/ some things are bit diff. i have more updated pics. Edited September 12, 2012 by jtraptor660 Quote Link to comment Share on other sites More sharing options...
quadpro26 Posted September 13, 2012 Report Share Posted September 13, 2012 link no work Quote Link to comment Share on other sites More sharing options...
jtraptor660 Posted September 13, 2012 Author Report Share Posted September 13, 2012 dang. it doesnt. well i have some pics on my phone. http://forums.atvdragracers.com/topic/9147-10mm-drag-build/ try this link Quote Link to comment Share on other sites More sharing options...
jtraptor660 Posted December 28, 2012 Author Report Share Posted December 28, 2012 5500. Still here Quote Link to comment Share on other sites More sharing options...
Josh Z Posted January 2, 2013 Report Share Posted January 2, 2013 That link doesnt work either... get a Photo bucket account... Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted January 8, 2013 Report Share Posted January 8, 2013 Id like to see pictures Quote Link to comment Share on other sites More sharing options...
jtraptor660 Posted January 11, 2013 Author Report Share Posted January 11, 2013 send me ur email or number abd i will send some over. Quote Link to comment Share on other sites More sharing options...
2strokeshees Posted January 11, 2013 Report Share Posted January 11, 2013 pm sent Quote Link to comment Share on other sites More sharing options...
bluebanshee98 Posted January 11, 2013 Report Share Posted January 11, 2013 pics will help. good luck with the sale Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted January 14, 2013 Report Share Posted January 14, 2013 Photobucket. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.