GEaring for a 4 mill cub

[Oregon dunner]

Im just wondering the best all around gearing for a 4 mill cub. I usually ride the dunes with the occasional drag. MY current set up is. 4mill cub with a very aggressive port work and 35 pwk. I am running 13 tooth front sprocket with 41 rear and I have 22.11.8 10 paddle extreams.

Thanks guys.

[RadarRacing]

Probably stock 14/41 would be good.

[werner]

15-45 on my 421

[Finch]

14-41 on my 392 thinkin about start playing with it but works good

[hp2000]

15/41

[Oregon dunner]

I like the lower gear ratio just because of the tree shots that we have in Oregon. They are steep and need all the wheel spin you can have without running out of gear. I have a few different ratios I will be trying out once I get back from working out of town. That chart helps a lot. I just wanted to see what everyone had to say.

[old put-put]

I'm running 17/38 on my cub with 20/11/10 knobbies and keep blowin the tires off of it. Might be a good thing though if it ever hooked up I may not have arms any more!!

[mike0chek]

i run 15/41 on my cub

[lansingbird]

i run 15/41 on my cub

Just wondering if anyone launches in second with stock gearing? First seems really short.