sheerider11 Posted September 6, 2012 Report Share Posted September 6, 2012 Quote Link to comment Share on other sites More sharing options...
mike0chek Posted September 6, 2012 Report Share Posted September 6, 2012 looks like stock rods, not sure about the rest. Quote Link to comment Share on other sites More sharing options...
ClayAiken Posted September 6, 2012 Report Share Posted September 6, 2012 I thought those were stock and the /R is what u should be scared about? Quote Link to comment Share on other sites More sharing options...
BigRed350x Posted September 6, 2012 Report Share Posted September 6, 2012 P.C. is the stamp on some of the older vitos cranks. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 7, 2012 Author Report Share Posted September 7, 2012 awesome. so is there anything else that might be a give away as to what crank that is. I had a stock crank with the 29l so thats what threw me off. Quote Link to comment Share on other sites More sharing options...
nastyracing Posted September 7, 2012 Report Share Posted September 7, 2012 Good its for sale 265$ shipped . Now that the cub cylinder has been measured and confirmed it is a 4 mil . We are going with its a vitos 4 mil short rod crank. Straight cuts sold so no gear will be on trans. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted September 7, 2012 Report Share Posted September 7, 2012 PC=performance crank performance crank=vitos 29L=115 rod Quote Link to comment Share on other sites More sharing options...
nastyracing Posted September 7, 2012 Report Share Posted September 7, 2012 Ok well thanks for clearing that up sir! Quote Link to comment Share on other sites More sharing options...
BANSHEE HP Posted September 8, 2012 Report Share Posted September 8, 2012 PC=performance crank performance crank=vitos 29L=115 rod ^true for the most part. vitos never made a 4mm 115 rod until the new polished rods were out. they did however make a 10mm with 115 rods that would say 30L on them. vitos webs were and still are all black.(ones in the pics dont look black) 29L was 110 rod and 30L is a 115 from vitos. now the newer polished rods do not say 29/30L they say 110 or 115. theres no way those welds were done by vitos either. i know there are other companys that bought forgeings from the same place as vitos but i dont know who they are. my guess is thats a crank from one of those ppl. has the p.c. lazered on them, same kind of rods, same style single groove labyrinth seal, but no black webs. Quote Link to comment Share on other sites More sharing options...
n2otoofast4u Posted September 8, 2012 Report Share Posted September 8, 2012 bill is spot on. i must have been on the pipe when i wrote that 29-110 30-115 Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted September 8, 2012 Author Report Share Posted September 8, 2012 Okay,I have another one I'll snap pics of. It's a little different. The web's are black Also the pc is stamped, not laser etched Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.