miami350 Posted August 30, 2012 Report Share Posted August 30, 2012 hey, i have a 06 Banshee im havin some problem on my right side cylinder..... the bike would idle good, but when i hit the gas that side feel like it cuts off n on i check the syn on the carb there are good. i try to swap the plug cable from the left to right and still the same also the left side exhaust Blow real hot What do all this mean??? i check compression seem fine... Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted August 30, 2012 Report Share Posted August 30, 2012 Plugged pilot jet Quote Link to comment Share on other sites More sharing options...
miami350 Posted August 30, 2012 Author Report Share Posted August 30, 2012 Plugged pilot jet i also swap carbs from left to right and still Quote Link to comment Share on other sites More sharing options...
bansheeboie Posted August 30, 2012 Report Share Posted August 30, 2012 Is it a fresh built motor? Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted August 30, 2012 Report Share Posted August 30, 2012 Put a new plug in the right cylinder. Have you checked your reeds? Is the right crank seal leaking causing a lean condition? Quote Link to comment Share on other sites More sharing options...
miami350 Posted August 30, 2012 Author Report Share Posted August 30, 2012 Check the reeds...... i notice it spitting alot of unburn gas on the right side.... so it might be the seal on that side?? Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted August 30, 2012 Report Share Posted August 30, 2012 You either have a bad spark plug that is fouled or a leaking crank seal? Check the oil and see if you have any in the clutch cover. I'm guessing it's just a fouled plug Quote Link to comment Share on other sites More sharing options...
miami350 Posted August 30, 2012 Author Report Share Posted August 30, 2012 plugs new, will check the oild in the morning Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted August 30, 2012 Report Share Posted August 30, 2012 I'd be doing a leakdown. Quote Link to comment Share on other sites More sharing options...
kyle101roppe Posted August 30, 2012 Report Share Posted August 30, 2012 all i can say is see if ur air filters clear and then its gotta be in between ur carb and the head Quote Link to comment Share on other sites More sharing options...
04zSpittinKlotz Posted August 30, 2012 Report Share Posted August 30, 2012 Its your clutch side crank seal , sucking in oil guaranteed. Quote Link to comment Share on other sites More sharing options...
miami350 Posted August 31, 2012 Author Report Share Posted August 31, 2012 yup check everything..... So 100% its the clutch side seal... brokin it down in the morning Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.