Asnaper Posted August 27, 2012 Report Share Posted August 27, 2012 All prices are plus shipping. I'm in harrisonville Missouri my cell is 816 738-1455 you can call or text. If using PayPal buyer pays fees or send as gift I'm doing this from my phone so I apologize if pics get out of order Thanks First is cylinders and head. 72.5 mm bore power valves and bores are great and ready to run. Stock porting no damage 1 dome has a very small nick in it hard to see in pics but wanted to note it. Shouldn't affect anything $900 Second 10 mil hot rods trued and welded crank. Only ran 2 weekends total at little Sahara ready to run no issues at all. Asking 450 Third is the cases from above cylinders and crank. No chain wack port matched to cylinder above there is some scaring in bottom of left side cylinder from a reed coming apart but causes no issues crank clears fine and bearing surfaces are fine. Asking 200 I will make a package deal on everything for 1400 going to have to upload pics as replays since I'm doing it from my phone. Will take me a few minutes Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 27, 2012 Author Report Share Posted August 27, 2012 Guys I'm getting a error message says file not found when trying to upload pics any suggestions? Computer is broke so I gotta do it from my phone Quote Link to comment Share on other sites More sharing options...
Infamous039 Posted August 27, 2012 Report Share Posted August 27, 2012 Upload your pictures to photobucket then Copy and Past the IMG code and your pics will show. Quote Link to comment Share on other sites More sharing options...
bansheeboie Posted August 27, 2012 Report Share Posted August 27, 2012 How did this setup run with stock porting? Alky? Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 27, 2012 Author Report Share Posted August 27, 2012 How did this setup run with stock porting? Alky? It ran really well on gas c12 I was happy with the torque it made with Bb in frame shearers it actually isn't as pipe as u would think. It was never timed on a track or on a dyno but guys with similar set ups were making around 110-115hp on gas. And I'll go to a buddies after work to try the pic thing again. I'm just putting my 421 back in it Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted August 27, 2012 Report Share Posted August 27, 2012 Here is all the pics for Asnaper Quote Link to comment Share on other sites More sharing options...
kessig4x4 Posted August 27, 2012 Report Share Posted August 27, 2012 Send PM on cases and crank very onterested/serious... Send me some pictures if you can on here or KEssig4x4@gmail.com Thanks man, Kyle Quote Link to comment Share on other sites More sharing options...
kessig4x4 Posted August 27, 2012 Report Share Posted August 27, 2012 (edited) Send PM on cases and crank very onterested/serious... Send me some pictures if you can on here or KEssig4x4@gmail.com Thanks man, Kyle Nevermind on pictures, you just had a few posted Oh , and I dropped my phone in the bay 2 days ago I can call later though Thanks Edited August 27, 2012 by kessig4x4 Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 27, 2012 Author Report Share Posted August 27, 2012 Nevermind on pictures, you just had a few posted Oh , and I dropped my phone in the bay 2 days ago I can call later though Thanks Sounds good I'll get more detailed pics of anything needed as well. I don't want any surprises for anyone. Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 27, 2012 Author Report Share Posted August 27, 2012 Here is all the pics for Asnaper Thanks a lot!! Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 27, 2012 Author Report Share Posted August 27, 2012 Sale pending on crank and cases Quote Link to comment Share on other sites More sharing options...
bansheeboie Posted August 28, 2012 Report Share Posted August 28, 2012 Lmk if it falls thru. I'm thinking bout goin 10mil and selling the cub Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 28, 2012 Author Report Share Posted August 28, 2012 Lmk if it falls thru. I'm thinking bout goin 10mil and selling the cub I will let ya know. Thanks Quote Link to comment Share on other sites More sharing options...
Asnaper Posted August 30, 2012 Author Report Share Posted August 30, 2012 Cases and crank sold. Quote Link to comment Share on other sites More sharing options...
Asnaper Posted September 1, 2012 Author Report Share Posted September 1, 2012 700 shipped will buy the cylinders. May trade for a glock 27 or 30 if someone has one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.