IceAlmeida Posted August 20, 2012 Report Share Posted August 20, 2012 hey guys i got a quick question i got a stock 2005 banshee stock bore and im just putting on my t5 pipes and vforce 3 reeds i installed the 280 main jet cuz im at 950 feet above sea level and i put the needle jet on the 3rd groove but the jetting instruction for the t5s say to put the needle on the 4th groove but im adding the vforce 3 reeds at the same time as the t5 pipes wat would u guys do listen to the t5 perfect jetting instruction and run it on the 4th groove or set it on the 3rd groove any tips would be grateful god bless Quote Link to comment Share on other sites More sharing options...
IceAlmeida Posted August 20, 2012 Author Report Share Posted August 20, 2012 no1 likes the Canadian i guess lol Quote Link to comment Share on other sites More sharing options...
hp2000 Posted August 21, 2012 Report Share Posted August 21, 2012 Go rich to be safe.. Quote Link to comment Share on other sites More sharing options...
guns4children Posted August 21, 2012 Report Share Posted August 21, 2012 If it has the 4th on the instructions run the 4th and if you way to rich start leaning it out. Quote Link to comment Share on other sites More sharing options...
mike0chek Posted August 21, 2012 Report Share Posted August 21, 2012 Go rich to be safe.. x2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.