slayer720 Posted August 13, 2012 Report Share Posted August 13, 2012 I have been running FMF Fatty gold Series pipes with Powercore II silencers ever since I purchased my banshee and just recently found a smokin' deal on a set of SB CPI inframes that I couldn't pass up I was just curious as to what you guys would recommend for jetting with the CPI's. My mods are: Stock cylinders with LED Performance sandman port job (They've also been bored out 2-3 times but I can't remember what they're out to) 28mm Keihin carbs with a LED Performance 30mm taper bore Uni-pod filters Running at sea level I was looking through the "What jets are you using?" thread and saw a similar setup to mine where the guy was running a 25 pilot and 310 mains... does that sound like a good starting point? Thanks guys Quote Link to comment Share on other sites More sharing options...
camatv Posted August 15, 2012 Report Share Posted August 15, 2012 those carbs use differnt jets than a mikuni. if you dont know that might try a shop for help with that.. id start 40/155 and go from there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.