kchubb-banshee350 Posted August 12, 2012 Report Share Posted August 12, 2012 I just bought a set of bills pipes used. They are going to be awesome when i get them all polished up. but what is the best way to do so? there is some surface rust and some parts of the pipe are very brown in color. Any suggestions on how to get the shine back into these pipes? thanks guys! Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted August 13, 2012 Report Share Posted August 13, 2012 Stuff em inside a set of good pipes that are already chromed. Quote Link to comment Share on other sites More sharing options...
eastonbighitter Posted August 13, 2012 Report Share Posted August 13, 2012 use a fine grit wet sand paper until you get all the rust off and the get some metal polish and a polishing wheel for a drill or bench grinder and go at it! Quote Link to comment Share on other sites More sharing options...
#1JUANstunna Posted August 13, 2012 Report Share Posted August 13, 2012 Stuff em inside a set of good pipes that are already chromed. AGREED Quote Link to comment Share on other sites More sharing options...
Rustynail Posted August 13, 2012 Report Share Posted August 13, 2012 Bills pipe are a good low to mid pipe...they do make a buch of power on the low end just dont rev as high as some of your GOOD pipes. I like bills. I have a set hanging in the garage for my next trail bike. Stuff em inside a set of good pipes that are already chromed. Quote Link to comment Share on other sites More sharing options...
kchubb-banshee350 Posted August 13, 2012 Author Report Share Posted August 13, 2012 Bills pipe are a good low to mid pipe...they do make a buch of power on the low end just dont rev as high as some of your GOOD pipes. I like bills. I have a set hanging in the garage for my next trail bike. For sure. they are great for the trails. And thats all i have around here. very rare i even hit the 6th gear. Quote Link to comment Share on other sites More sharing options...
yzrmbsg Posted August 13, 2012 Report Share Posted August 13, 2012 #00000 steel wool to take the grime and rust off, then some polish and a wheel, shines them right up! Requires a bit of elbow grease! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.