Jbeck103 Posted August 9, 2012 Report Share Posted August 9, 2012 So theres a few questions in this topic here. This coming winter I am planning on giving my quad a fresh top end to her. As of right now I am planning on going through www.fullboreonline.com for there top end rebuild kit with the WSM FORGED BANSHEE RACE PISTONS. One question was if anyone has had anything done by them and any comments would be great! Another question I had was I wanted to get a little more bang out of the motor so I figured while I got it apart I might as well put some smaller domes in there and bump up the compression. Another question was what size you think I should run? I was thinking about a 19cc (dont care I already run 112 octane). The next question was if I can install aftermarket domes in a stock head? And if I can do it without a machine shop or anything like that? Any advice would be great! "I wanna go fast!" Mods:Trinity 2:1 intake, stage IV reeds, Stage IV pipes, 35mm PWK Carb, Adj. Stator 1 Quote Link to comment Share on other sites More sharing options...
Nightmare Posted August 9, 2012 Report Share Posted August 9, 2012 You wanna go fast, contact a site sponser Quote Link to comment Share on other sites More sharing options...
trickedcarbine Posted August 9, 2012 Report Share Posted August 9, 2012 You wanna go fast, contact a site sponser Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted August 9, 2012 Report Share Posted August 9, 2012 So theres a few questions in this topic here. This coming winter I am planning on giving my quad a fresh top end to her. As of right now I am planning on going through www.fullboreonline.com for there top end rebuild kit with the WSM FORGED BANSHEE RACE PISTONS. One question was if anyone has had anything done by them and any comments would be great! Another question I had was I wanted to get a little more bang out of the motor so I figured while I got it apart I might as well put some smaller domes in there and bump up the compression. Another question was what size you think I should run? I was thinking about a 19cc (dont care I already run 112 octane). The next question was if I can install aftermarket domes in a stock head? And if I can do it without a machine shop or anything like that? Any advice would be great! "I wanna go fast!" Mods:Trinity 2:1 intake, stage IV reeds, Stage IV pipes, 35mm PWK Carb, Adj. Stator NO, you can NOT install afterarket domes in a stock head- stock heads DO NOT have interchangeable domes. You need an aftermarket head, preferably from Noss, Chariot, or ProDesign. Quote Link to comment Share on other sites More sharing options...
willardwright59 Posted August 9, 2012 Report Share Posted August 9, 2012 i actually think you can have domes put in the stock head. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted August 9, 2012 Report Share Posted August 9, 2012 (edited) i actually think you can have domes put in the stock head. SHOW ME PICTURES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! OR GTFO!!!!!!!!!!!!!!!! Edited August 9, 2012 by bansheesandrider Quote Link to comment Share on other sites More sharing options...
willardwright59 Posted August 9, 2012 Report Share Posted August 9, 2012 <br />SHOW ME PICTURES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! OR GTFO!!!!!!!!!!!!!!!!<br /><br /><br /><br />nevermind, i thought it said something else. link below.... mill head .070 & dome i thought it said add domes. http://www.redline-racing.net/MODS.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.