trickedcarbine Posted August 8, 2012 Report Share Posted August 8, 2012 My bike has sat almost a year and now that the new motor is in it I have got some time on the chassis and it is definitely time to freshen some things up again. I have replaced all the bearings, and seals now, and after a recent ball joint catastrophe I am tearing the whole front end off and re assembling it with fresh ball joints and bushings. I have always ran the Delron bushings and they are ok, but would there be any benefit to running the bronze style bushings? Quote Link to comment Share on other sites More sharing options...
dave5.0 Posted August 30, 2012 Report Share Posted August 30, 2012 Bronze maybe last longer? More expensive prob. I bought a kit a while back that was all needle bearings. That crap was smoooooth. Quote Link to comment Share on other sites More sharing options...
sheerider1026 Posted August 30, 2012 Report Share Posted August 30, 2012 I like the delrin. They are self lubricating ( no shit). Quote Link to comment Share on other sites More sharing options...
TORKER Posted August 30, 2012 Report Share Posted August 30, 2012 Scrap the "bronze" idea. Go with Delrin bushings. You may save yourself an A-arm or two. Just my opinion/experience. Others may be different. TORKER. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.