Oregon dunner Posted August 8, 2012 Report Share Posted August 8, 2012 I just picked up another banshee that has a pretty much stock motor except cpi in frames and vf3's and K&N pods. It has the tors still on it. The guy said it might need to be jetted and not quite sure if he new what size jet he had in it. I took it all apart and it had had 310 mains. Needle was in 3rd clip with 25 pilots. It seems to run rich for a stock motor when I start it up. IS this a little rich for riding at sea level with these mods? Thank You. Quote Link to comment Share on other sites More sharing options...
Dahl87banshee Posted August 8, 2012 Report Share Posted August 8, 2012 I would try a 27.5 and a 300 and leave the clip. Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted August 8, 2012 Report Share Posted August 8, 2012 No expierence with CPIs, but I would definetly put in a 27.5 pilot, 310 is probably rich so try a 300 or maybe even a 290. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.