06bluebanshee Posted July 30, 2012 Report Share Posted July 30, 2012 I have PC pipes and VF3 reeds open air box. Which port job do I want to match my pipes? I ride dunes and mx track and trails. Dune port or MX for PC pipes? Can anyone chime in with info. Thanks! Quote Link to comment Share on other sites More sharing options...
Infamous039 Posted July 30, 2012 Report Share Posted July 30, 2012 I would say anything from an aggressive dune port and under. You should call a builder and discuss what you have and what your looking for in a motor. Quote Link to comment Share on other sites More sharing options...
Surfrjag Posted July 30, 2012 Report Share Posted July 30, 2012 I have an agressive trail port with my pc's. Key is talking to the builder... Quote Link to comment Share on other sites More sharing options...
willardwright59 Posted July 30, 2012 Report Share Posted July 30, 2012 i had ran them on my stock stroke dune port from HJR and it ripped!! pulled hard everywhere. now that im going to local tracks with buddys to mess around, i built a mx hardcore 4 mil motor and i cut the PC silencers down about 3 inches and run them unpacked. and it ripps even harder! Quote Link to comment Share on other sites More sharing options...
mouzon30 Posted July 31, 2012 Report Share Posted July 31, 2012 x2 on the mx hardcore by hjr thats what i have and its all power i used the pc headers and the t5 back pipes and it sound bad ass Quote Link to comment Share on other sites More sharing options...
blubyyou Posted July 31, 2012 Report Share Posted July 31, 2012 What does cutting the silencers back 3" do? Sorry to hi-jack the thread. Just curious as I also run PC's on my HJR 4 mil dune port. By the way I like the PC's on the motor. Good power all over. Quote Link to comment Share on other sites More sharing options...
robert0762 Posted August 4, 2012 Report Share Posted August 4, 2012 (edited) Hjr hardcore mx port was designed to match the pc pipes . That's what kev told me when I got mine. I love it but the never ending hunger for more has taken over once again. So now I am building a 10 mil super serval. Edited August 4, 2012 by robert0762 Quote Link to comment Share on other sites More sharing options...
06bluebanshee Posted August 6, 2012 Author Report Share Posted August 6, 2012 Thanks Robert! It's a huge power gain over a stock motor tho.. right? Quote Link to comment Share on other sites More sharing options...
toytech Posted August 6, 2012 Report Share Posted August 6, 2012 Thanks Robert! It's a huge power gain over a stock motor tho.. right? hard core mx port will be a huge gain over stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.