tibo1988 Posted July 29, 2012 Report Share Posted July 29, 2012 Hello, first post woo!!! Not new to wrenching, just to banshees. I have a 1999 Banshee. Runs pretty good little hesitation on one cylinder that smokes a little. I'm ready to fix that. Havn't dug into yet, at work for the next three days ughhhh. Unk if it is bored or ported yet but I'm gonna assume not. Po said it has a new tranny, crank, and clutch who knows but everything works. Starts right up and idles for about 30 seconds and dies, stays running if I want it to with a little gas. Has good compression when kicking. Revs up fine. The mods are as follows Toomey t6 pipes and silencers V force reeds and spacer No airbox lid/snorkel Tors removal with the idle screws Aftermarket filter I live in the Philadelphia area, I don't know what the jetting is now just wanted to know what I should have in there. Maybe help me with the hesitation, smoking and rough idle. Has new plugs gonna clean the carbs and sync. Please let me know needle clip, air screw, and main and pilot sizes. Quote Link to comment Share on other sites More sharing options...
tibo1988 Posted July 29, 2012 Author Report Share Posted July 29, 2012 Quote Link to comment Share on other sites More sharing options...
tibo1988 Posted July 29, 2012 Author Report Share Posted July 29, 2012 Quote Link to comment Share on other sites More sharing options...
tibo1988 Posted July 29, 2012 Author Report Share Posted July 29, 2012 Hello, first post woo!!! Not new to wrenching, just to banshees. I have a 1999 Banshee. Runs pretty good little hesitation on one cylinder that smokes a little. I'm ready to fix that. Havn't dug into yet, at work for the next three days ughhhh. Unk if it is bored or ported yet but I'm gonna assume not. Po said it has a new tranny, crank, and clutch who knows but everything works. Starts right up and idles for about 30 seconds and dies, stays running if I want it to with a little gas. Has good compression when kicking. Revs up fine. The mods are as follows Toomey t6 pipes and silencers V force reeds and spacer No airbox lid/snorkel Tors removal with the idle screws Aftermarket filter Afrermarket dyna ignition ( is this a good brand ) I live in the Philadelphia area, I don't know what the jetting is now just wanted to know what I should have in there. Maybe help me with the hesitation, smoking and rough idle. Has new plugs gonna clean the carbs and sync. Please let me know needle clip, air screw, and main and pilot sizes. Quote Link to comment Share on other sites More sharing options...
tibo1988 Posted July 29, 2012 Author Report Share Posted July 29, 2012 Can anyone tell me what intake setup this is, and if this ignition is ok? Quote Link to comment Share on other sites More sharing options...
tibo1988 Posted July 29, 2012 Author Report Share Posted July 29, 2012 And I Do have an afrermarket spacer correct? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.