jsinar Posted July 16, 2012 Report Share Posted July 16, 2012 It's not stock, going by the 2 areas of threads, and I ordered some stock axle nuts and the threads are wrong.. Anybody know what it is? Quote Link to comment Share on other sites More sharing options...
SAVAGE420 Posted July 16, 2012 Report Share Posted July 16, 2012 Not with that small dumb pic. Post a full size one....or a couple. Measure the threads. Where is it from? Quote Link to comment Share on other sites More sharing options...
jsinar Posted July 17, 2012 Author Report Share Posted July 17, 2012 I think I figured it out.. I believe it's a raptor axle. from the pic of the nuts in this listing, it would make sense that the set screw would tighten down in the space between the threads.. and these threads are real fine just like the ones on the axle. http://www.ebay.com/itm/05-Yamaha-YFM-660-660R-Raptor-Axle-Lock-Nut-21-/230825479063?pt=Motors_ATV_Parts_Accessories&hash=item35be454b97&vxp=mtr Quote Link to comment Share on other sites More sharing options...
Starwriter Posted July 17, 2012 Report Share Posted July 17, 2012 I think I saw somewhere that the offset is different between a Banshee and a Raptor axle. Of coarse, Banshee's are not lined up front to rear right out of the showroom. So, the Raptor axle will either correct some of the misalignment or make it worse. Quote Link to comment Share on other sites More sharing options...
jsinar Posted July 17, 2012 Author Report Share Posted July 17, 2012 The offset's not that bad, maybe an inch or a little more, I'm over that now. lol. I was trying to figure out what it was so I could get the correct lock nuts for it, that cheap-o aluminum one that came on it, the threads aren't in that good of shape. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.