sredish Posted July 5, 2012 Report Share Posted July 5, 2012 (edited) Alright. So, I have an 06 with not a lot of hours at all, maybe 10 or 15. Bike is stock except I pulled the stock jugs, pistons, carbs, intake and set it aside in a box and replaced them with passion ported cylinders, vforce reeds and a pair of 33mm carbs. Carbs have since been sold. There's a crank bearing that seems to be going out. I'm not 100%, need to take a better look but there might be a slight scar on the cylinder wall and there was for sure some heat on the piston. With this little amount of hours, i'm not sure what happened but the bike has mostly sat for awhile. I recently changed the oil and everything and went to get it started (for a sale) and there was crank noise. Tore top end down and saw some piston heat and scoring. I'm guessing something happened with lube to it. So, rather than screw with it, I've decided to do a complete part out. I'll get an inventory list going here in the next day or so. Frame, headlights, bolt hardware and harness may be spoken for. Pipes and aftermarket carbs are gone. Still have stock carbs and possibly a 38mm 2-1 carb w/ oversize bowl setup. Other than that, everything else is up for grabs. So, if there's something you need specifically, let me know and hopefully I can get straight to that part and get it to you. Here is a quick picture I have of the bike before I pulled the top end. These wheels are not part of it, they're honda. It has the stock black rear wheels and tires that match the front. I also have some HardKor hubs that fit Yamaha and are Honda pattern. Not sure yet if I'm selling but I'll think about it, they're expensive and hard to buy back. Edited July 5, 2012 by sredish Quote Link to comment Share on other sites More sharing options...
chevy913 Posted July 5, 2012 Report Share Posted July 5, 2012 How much for plastic shipped to 48312? Quote Link to comment Share on other sites More sharing options...
Buckwheat Posted July 5, 2012 Report Share Posted July 5, 2012 Tim Steele is looking for black plastics too. Quote Link to comment Share on other sites More sharing options...
sredish Posted July 5, 2012 Author Report Share Posted July 5, 2012 Tim Steele is looking for black plastics too. ok so you guys know shipping plastics is a muthafucka..... i can get a quote. i'll have it for ya tomorrow. Quote Link to comment Share on other sites More sharing options...
ticktock Posted July 5, 2012 Report Share Posted July 5, 2012 Ship the plastics FedEx ground. But some saran wrap from the dollar store and wrap them together. It will cost 40-50$ to ship them domestic and it takes 3 days Adam Quote Link to comment Share on other sites More sharing options...
sredish Posted July 5, 2012 Author Report Share Posted July 5, 2012 (edited) forgot to mention. also have a milled stock head for pump gas along with the orig stock head. both are off at the moment. Edited July 5, 2012 by sredish Quote Link to comment Share on other sites More sharing options...
sprinklerman Posted July 5, 2012 Report Share Posted July 5, 2012 Id like a shot at the plastics and the frame, if the other buyers fall thru. Also handlebars. Thanks Quote Link to comment Share on other sites More sharing options...
JpRedline Posted July 5, 2012 Report Share Posted July 5, 2012 Really interested for the bottom end! How much? I tried to PM'ed you but its not working... Thanks Jp Quote Link to comment Share on other sites More sharing options...
sredish Posted July 6, 2012 Author Report Share Posted July 6, 2012 (edited) Really interested for the bottom end! How much? I tried to PM'ed you but its not working... Thanks Jp sent you a PM. Id like a shot at the plastics and the frame, if the other buyers fall thru.Also handlebars. Thanks Sent you one as well. Edited July 6, 2012 by sredish Quote Link to comment Share on other sites More sharing options...
moneybags Posted July 6, 2012 Report Share Posted July 6, 2012 I might be interisted in buying whats left of the motor. Send me a price shipped to 95961. Thanks Quote Link to comment Share on other sites More sharing options...
The Prince Posted July 6, 2012 Report Share Posted July 6, 2012 would you sell your oversize bowl Quote Link to comment Share on other sites More sharing options...
wacko2000 Posted July 6, 2012 Report Share Posted July 6, 2012 Look for a good running solid flywheel Pics and price please Joe Quote Link to comment Share on other sites More sharing options...
Bdstalls40 Posted July 6, 2012 Report Share Posted July 6, 2012 I really want the rear fenders. Let me know how much. Thanks. Also where r u located. Might b able to go for a road trip to come puck up parts. Quote Link to comment Share on other sites More sharing options...
Tommilicious Posted July 6, 2012 Report Share Posted July 6, 2012 How much for the front sprocket, washer, and nut & the rear sprocket/hub? Shipped to 53185 Thanks. Quote Link to comment Share on other sites More sharing options...
matt1 Posted July 6, 2012 Report Share Posted July 6, 2012 Intersested in selling the unported topend? txt me 386 688 0466 Matt. Your mailbox is full and will not accept anymore pms. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.